Audited Supplier
Product instruction
Timing belts for transport drives are usually not standardised products. Approximately 70 % of PU timing belts produced by BRECO require customisation. The great challenge posed by this fact is the need to develop a flexible, yet economically viable method for timing belt finishing. One important step toward a solution was further developing the water jet cutting method. The advantages of this method include: Greater precision, lower cost, shorter delivery times.
Compared with the traditional methods, the great advantage of water jet cutting is its ability to cut any required contour through both materials without additional tool costs. This method does not generate the otherwise common passive forces that are inevitable in die-cutting. It also does not create burrs, which always appear on the outlet side of the milling tool during machining.
The contours are highly dimensionally stable and the cut faces are particularly angular. Thanks to quick drying after the cut and the excellent corrosion protection, corrosion is not an issue despite contact of water with the cut tension members. The fine filaments consist of high-alloyed steel and are galvanised separately. So far there have been no complaints about tension member corrosion.
cutting samples
Our Service
1. Maintenance free of charge for 12 months .
2. We will provide the consumable parts at an agency price.
3. 24 hours online service, free technical support.
4. Machine has been adjusted before delivery, operation disk is included in the delivery.
5. We have manual instruction and Videos for software Installation, operation and machine's using and maintenance; We will send professional technician to customers' factory, provide them two-weeks training,including working principle of machine, Auto CAD drawing, common problems and solution, etc.
Product packaging
1. Our Wooden Case is after fumigation treatment. Needn't timber inspection,saving shipping time.
2. All the spare parts of the machine were bovered by some soft materials,mainly using Pearl Wool.
Avoiding all damages that could happen in the delivery process.Then we'll covered plastic wrap out it tightly, make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
3. The outmost is Wooden Case With Fixed Formwork.
4. The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
Machine inspections
The finished product has been tested for more than 24 hours, including software operation test, high-pressure pump operation test, machine horizontal and vertical test, limit test, etc. It is allowed to leave the factory after meeting the national cutting standards.
Corporation suppliers
The raw materials and configurations of production equipment are selected from high-quality materials and suppliers to ensure quality from the source
Factory instruction
The site and space of production equipment shall comply with the production standards of mechanical equipment and implement the 5S management system.
Welcome to HEAD water jet company!
