Audited Supplier
White
Transportation Tools
RoHS, ISO9001, ASTM, JIS, GB, EN, ASTMB
Extruded
6000 Series
T351 - T651
Powder Coating
Non-alloy
250 Kg
6/8/9/10/12/16
Contain
Tank
zhongbang
Standard Shipping
12192*2438*1730mm
China
8609003000
Product Description
This product is a mobile pressure vessel which is connected by cylinder group and container frame, pipeline, safety accessories, loading and unloading accessories and other components. It is the special mobile pressure vessel that suitable for storing and transporting compressed gas such as air, hydrogen, natural gas and so on, suitable for road transportation, sea and land combined transportation.
Advantage
1. Large filling capacity, light weight, cost-effective;
2. High safety: the bottle material is good plastic toughness, uniform force, reasonable stress distribution;
3. Good fatigue resistance: the use of finite element fatigue analysis and design, to ensure the good fatigue resistance of the equipment;
4. Both ends of the bottle body are provided with safety discharge device. In case of abnormal working conditions such as overpressure and fire, the safety discharge device will work automatically to ensure the safety of property and personnel.
- Basic technical parameters table for hydraulic gas filling substation:
| project | technical parameter | project | technical parameter |
| working pressure | ≤ 20MPa | Exhaust volume | ≥ 2000NM3/H (101.325kPa, 20 ºC) |
| High pressure gas outlet pipe | internal diameter ф 18mm | Gas extraction rate | 95% (at a working pressure of 20MPa for gas injection) |
| Residual pressure after unloading the steel cylinder | 1MPa | Adapt to ambient temperature | -40 ºC~+50 ºC |
| Main motor power | 30KW | Total system power | ≤ 80KW |
| Equipment weight | Approximately 6565Kg | Equipment noise | ≤ 75dB, at a distance of 1 meter from the equipment |
| Finished gas contains oil | ≤ 10ppm | Dust containing particle size | ≤ 5 µ m |
| control mode | PLC programmable automatic control | Work cycle | continuity |
| Exhaust temperature | Normal temperature (ambient temperature) | Explosion proof level | Exdem [ia] ia BT4 |
| Gas system pressure gauge | Select domestic products with an accuracy level of 1.5 | Equipment size (mm) | 4602 long × Width 2162 × High 2510 |
| Time for converting quick fitting joints between two vehicles: | 3-5 minutes (after the quick installation joint conversion is completed, the second vehicle starts working, and the first vehicle's return oil does not affect the second vehicle's refueling). | ||
| On site display instruments and control devices | Set up pressure gauges at the equipment operation site; The equipment operation area is equipped with emergency stop buttons and start buttons. | ||
2. Basic technical parameters table for hydraulic gas station trailer:
| Semi Trailer | project | numerical value | Large volume seamless steel cylinders | project | numerical value | |
| Semi trailer model | HGJ9380GGQ | Nominal working pressure | 20Mpa | |||
| Semi trailer curb weight | 35235kg | Working environment temperature | -40-60ºC | |||
| Semi trailer full load mass | 38490kg | Bottle material | 4130X | |||
| Full load axle load distribution | Traction seat | 13730kg | natural gas | natural gas | ||
| Rear axle | 21920kg | Filling Medium | 18m3 | |||
| Leg load | 19645kg | Filling medium volume | 4540Nm3 | |||
| Front turning radius mm | 1520 | Filling mass | 3255kg | |||
| Gap radius | 1620mm | Quality of steel cylinder | 21840kg | |||
| Height of traction seat joint surface (unloaded) | 1258 | Hydraulic test pressure | 33.4Mpa | |||
| Air tightness test pressure | 20Mpa | Air tightness test pressure | 20Mpa | |||
| External dimensions | 12960*2496*3000mm | External dimensions | Φ559*10975 | |||
| Container category | three | |||||
