Audited Supplier
TDW-S4
Iron Casting;Cast Iron
Steel Casting;Cast Steel
68-74.5
11-18
1.8-4.0
1.4-2.4
1.0-2.0
3.5-5
0.5-1.5
TDW
Ton Bags or Pallet
15-30mesh
China
253010
Product Description
CQ TDW-S3 slag coagulant for cast iron| specification: | ||||||
| SiO2 | Al2O3 | Fe2O3 | CaO | MgO | K2O | Na2O |
| 69-74.5 | 11-18 | 0.5-1.9 | 1.0-2.0 | 0.18-0.28 | 3.5-4.5 | 1.8-3.0 |
size: 15-30mesh
| Package | 25kg small bag in 1MT jumbo bag |
| Capacity | 20-22MT/1*20FCL container |
Features of TDW slag coagulant,slag remover, perlite:
TDW-S4 slag coagulant:Slag accretion fast and remove slag just for one time, and slag removal completely.
TDW-S4 slag coagulant:No damage to the furnace wall and ladle, reducing rare metals leaving
TDW-S4 slag coagulant:Eliminate slag inclusions, improving the quality of castings
TDW-S4 slag coagulant:Fast film formation and effective insulation
TDW-S4 slag coagulant:Doesn't burst or splash and harmless for health.
Usage
It is very easy to use and less usage amount, cost saving.
It is very easy to use.
Firstly, you should scatter the slag coagulant over the molten metal before pouring it when it is used in the furnace;
Then pick the slag out after it coagulated. If used during the casting, you should scatter the slag coagulant over the molten metal after the ladle fulfilled.
Please repeat the above if there is too much slag.
Usually the application rate is 1-1.5kg per ton molten iron; it depends on various slag content and quality of castings.
Scatter the product over the molten metal after deslagging, it will spread and cover the surface.
It descends along the pouring and doesn't stick or hang the ladle.
After pouring pick the covering out or keep it on the surface of the molten metal to preserve heat.
PACKAGE AND STORAGE:
Package: 20kg/25kg woven bag/paper bag
1000kg ton bag/wrapping pallet
20-22MT/1*20FCL container
Storage: water proof and moisture proof.
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, you are welcome to visit our company.
