Audited Supplier
Casting Iron Valve Body Full PTFE Seat Butterfly Valve With Pneumatic Actuator, APL210 Limit Switch Box
Advantage
1. High precision and sensitivity
2. Easy to operate with other electric adjustment instruments
3. Simple to install
Product Specification
Main parts and materials
| Part Name | Material |
| Body | Cast Iron, Stainless steel |
| Seat | EPDM, PTFE, NBR |
| Stem | SS416 |
| Disc | SS304, SS316, CF8, CF8M |
| Worm Handle | Q235/Component |
| Technical Specification | |
| Design Standard | API 609, JIS 2032, GB/T12238 |
| Face to Face | API 609, JIS 2032, GB/T12221 |
| Flange Standard | ASME B16.5, JIS B2213, GB/T17241.6 |
| Inspection & Test | API 598, JIS B2003, GB/T13927 |
| Working Temperture | -55ºC to 200ºC |
Product Details Show
2. Bubbles-tight sealing with no leakage under the pressure test.
3. The connection of driven part conforms to ISO5211.
4. Wide selection of materials, applicable for various medium.
5. The valve body and disc are accurately machined which results in low operation torque and long service life and reliability.
6. Can be disassembled, material-specific recycling possible.
7.Can be installed at the end of pipe for lugged type butterfly valve.
Nominal Diameter | DN40-1200/1.5"-48" |
Face to Face | API 609, DIN 3202 K1, ISO 5752, BS 5155, EN 558 |
Flange Accommodation | AS 2129 "D", "E" BS 10 "D", "E" JIS 5K/10K/16K ASME B16.1 125LB ASME B16.5 150LB BS 4504 PN6/PN10/PN16 DIN 2501 PN6/PN10/PN16 ISO 7005 PN6/PN10/PN16 |
Design Standard | API 609, BS 5155, EN 593, MSS SP-67 |
Top Flange | ISO 5211(according to the customer's need) |
Temperature Range | -20ºC to +200ºC(depending on pressure,medium and materal) |
Test Inspection | APL 598, EN 12266-1 |
Suitable Medium | freshwater, wastewater, sewage, seawater, air, vapor, food, oils, medicine alkailis, salt, etc |
A:The bushing can assure the correct connection of the upper shaft and the lower shaft, at the same time, it can make sure
the smooth trunning of the shaft.
B:The upper seal made of NBR or fluorine-rubber helps to prevent the pollution from the outside world.
C:Shaft.
D:The taper pin is used to fix the position of the shaft and the disc in order to guarantee the trunning of them
(it has the same material with the disc).
E:The end face seal can be got through the interference fit between the end of the of the disc and the seat.
F:The seal between the disc and the seat can be got through interference fit.
G:Ductile iron, stainless steel and AI-bronze can be taken according to customer's need.
H:There're two types for the body-the wafer type and lug type. On the surface of the body, epoxy powder is painted.
Product Packing
Product Application
Contact Us
Web: tychenfluid.en.made-in-china.com
