Audited Supplier
Stainless Steel
Disclose Information
Centrifugal
Low Pressure
ISO, CE
LongCheng
China
Product Description
8-09 series (designed on demand to provide you with cost-effective solutions)
8-09 type high-pressure centrifugal fan is a special fan with melting rate of 1,2,3,5,7t/h iron furnace, also can be used as a variety of furnaces, forging and smelting furnace air and transport air and non-corrosive, non-spontaneous combustion, non-sticky substances of the gas, and other similar performance can also be selected, but the temperature of the transport medium shall not exceed 80 ºC, the media containing dust and hard particles is not greater than 150mg / m³. 9-12 type I plant design number N6 8A, 7.1A, 7.4D, 7.7A, 8D, 9D and so on. The 9-12 type fan is designed by our factory as N6.8A, 7.1A, 7.4D, 7.7A, 8D, 9D and so on.
When the above models can not meet your needs, we have the ability to design according to your needs, to provide you with cost-effective solutions.
| Material | Carbon steel/stainless steel (welded) | Power | 7.5Kw-110Kw |
| Flow rate | 675-6500m³/h | Pressure | 10530-19073Pa |
| Spindle speed | ≤4000rpm | Impeller diameter | 250-2000mm |
| Gas temperature | Normal temperature, objective requirements, ≤500ºC high temperature | Transmission mode | A(click direct connection)C(pulley drive)D(coupling drive)etc. |
| Characteristic | Ordinary/anti-corrosion/wear-resistant/high-temperature-resistant/explosion-proof | Conveying gas | Crystallized gases/corrosive gases/granular substances/high temperature resistant gases/flammable/explosive |
| Customization | yes | Click | Industrial frequency motors, inverter motors, inverter explosion-proof motors (you can specify the brand) |
| Application | Air supply to industrial furnaces, conveying of lightweight granules/powders/chips/fibers, drying/cooling of materials, ventilation and smoke exhaust, etc. | ||
