Audited Supplier
The T-type Joint Pipes (Push-on) produced by our company range from DN80mm to DN2600mm are flexibly jointed with sockets and spigots; they are the first choice in urban water pipe networks due to their convenient installation, strong seismic performances, seal ability and corrosion resistance.
Type: | The T-type Joint Pipe (Push-on) |
Standard: | ISO2531, EN545, EN598, etc |
DN: | DN80mm~DN2600mm |
Material: | Ductile Cast Iron GGG50 |
Pressure: | PN10, PN16, PN25,PN40 |
Wall Thickness: | K9, K8, C25, C30, C40 |
Length: | 6m, cut to 5.7m |
Application: | Water supply project, drainage, sewage, irrigation, water pipeline. |
Internal Coating: | a). Portland cement mortar lining |
b). Sulphate Resistant cement mortar lining | |
c). High-Aluminum cement mortar lining | |
d). Fusion bonded epoxy coating | |
e). Liquid epoxy painting | |
f). Black bitumen painting | |
External Coating: | a). zinc+bitumen(70microns) painting |
b). Fusion bonded epoxy coating | |
c). Zinc-aluminum alloy +liquid epoxy painting | |
| Note: The coating can also be accordance with customers' requirements. | |
The inspector checks the dimension of the socket. The inspector checks the wall thickness of the pipe.
The inspector checks the dimension of the pipe's outer diameter. The inspector checks the thickness of the cement.
