Chemical Chlorine Dioxide Generator for Oil Field Water Treatment

Chlorine Dioxide is safe and ideal for water treatment.
Waterman brand underwater immersion chemical chlorine dioxide generator
is specially customized for places with high safety requirements such as oil fields.
The reactor is submerged in a pool or water tank.
Raw chemicals: sodium chlorite and hydrochloric acid, or three precursors, option

Place of Origin: Jiangsu, China (Mainland)
Model: CPF-5000S
Capacity: 5000 gram per hour
Reactor: Titanium alloy, underwater immersion
Certification: ISO9001:2015
EINECS No. 233-162-8
CAS NO. 10049-04-4
Power Supply: 380V/50Hz
Installation Method: vertical
Package: Plywood box
Shell life: 8 years

Main parameters:
1. Operating voltage: AC380V plus or minus 10%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage                     Residual ClO2 auto-control (option)
                     Flow auto-control (option)                     Low liquid level alarm function
                    Timing start / stop function
                    Alarm remote transfer

Chemical Equation & Raw Material:
5 NaClO₂ + 4HCl = 4ClO₂ + 5NaCl + 2H₂O
NaClO₂: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO₂ and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO₂ solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.

The highest outlet pressure of ClO₂ solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO₂ can be adjusted manually or automatically by receiving 4-20mA signal sent by Flow rate sensor or Residual ClO₂ sensor.