Audited Supplier
CPF-30CX-10
Lifetime Paid Service After The Warranty Period
1 Year
ISO9001, CE
Industry
220V
Chlorine Dioxide
Manual, Auto Option
Naclo2 and HCl
Titanium Alloy
PVC
Waterman
Plywood Box
10 gram per hour
Made in China
8419200000
Product Description
Place of Origin: Jiangsu, China (Mainland)
Model: CPF-30CX-20
Certification: ISO9001, CE Marked
EINECS No. 233-162-8
CAS NO. 10049-04-4
Control Mode: Manual / linkage / Auto-control
Installation Method: Wall-mounted or vertical
Power Supply: Electric, 220V/50Hz
Main parameters:
1. Operating voltage: AC220V plus or minus 20%2. Working temperature: -5 ~ 50 degrees Celsius3. Relative humidity: 80%4. Maximum pressure of water-pipe-line: <0.7Mpa5. There should be no strong electromagnetic field interference around the equipment.6. Function: Manual / Linkage Residual ClO2 auto-control (option) Low liquid level alarm functionTiming start / stop function Alarm remote transfer
5 NaClO2 + 4HCl = 4ClO2 + 5NaCl + 2H2O
NaClO2: industrial sodium chlorite (purity≥78% ) or liquid
Activator: industrial first grade compound hydrochloric acid (purity≥31%) or other weak acid or strong acid
Two raw chemicals of NaClO2 and HCl are to be inhaled into the reactor proportionally by two metering pumps, in which produce quantitative high-purity ClO2 solution, and then to be dosed directly in the water tank or pressured water pipe together with the dilution water.
The highest outlet pressure of ClO2 solution is 0.40Mpa. Raw chemicals conversion rate is higher than 90%. The dosage of ClO2 can be adjusted manually or automatically by receiving 4-20mA signal sent by Flow rate of Residual ClO2 sensor.
