Audited Supplier
HIGH PRECISION INJECTION MOLDING MACHINE
Powerjet New Series Hydraulic Injection Molding Machine With Faster Injection And Plasticizing Speed, More Stable And Higher Efficiency.
Clamping Force - 900~10000(KN)
Driving System - Hydraulic
Motor Type - Servo
Applications - Food and Beverage Packaging, Necessities Products, Home Appliances, Electrical Components, Automotive Parts, Bottle Caps, etc.
CLAMPING SYSTEM(Center-Press Toggle)
-Improve Stability In Molding
-Reduce Platen Damage
-Higher Speed And Stable Platen Movement
Center-press toggle system designed to apply equal force on mold during clamping and preventing platen damage.
New design of the clamping structure, ensures the rigid mold platen enhancement increasing more than 20%.
Anti-tilt side design of the foot ensures the opening and closing of smooth high-speed.
European ejector design, enhances the adaptability of the mold.
INJECTION SYSTEM
-High Precision
-More Stable
-Good Plasticization
High rigidity integral linear guide low friction, improve the accuracy of injection.
Long life-time double carriage movement cylinders.
HYDRAULIC SYSTEM
New servo system applications ensures machine power to increase more than 10%.
Reasonable and orderly piping layout, significantly reducing loss in oil channel.
Oil circuit consists of standard components, improving the reliability of hydraulic system.
CONTROL SYSTEM
More reasonable electric circuit layout, improving anti-interference ability and stability.
Central (network) management system interface, easy for production management.
More powerful software, friendly to extension.
Optimized control system, energy saving and high response.
| LAMPING UNIT | Clamping force | KN | 4000 |
| Opening stroke | mm | 710 | |
| Max.datlight | mm | 1440 | |
| Platen size | mm | 1050*1050 | |
| Space between bars | mm | 740*720 | |
| Max.mold height | mm | 730 | |
| Min.mold height | mm | 300 | |
| Ejector stroke | mm | 210 | |
| Ejector force | KN | 110 | |
| INJECTION UNIT | Screw diameter | mm | 75 |
| Screw L/D Ratio | L/D | 20 | |
| Injection Pressure | MPa | 171 | |
| Shot volume | cm3 | 1458 | |
| Shot weight (ps) | g | 1301 | |
| oz | 45.9 | ||
| Injection rate | g/s | 403 | |
| Screw stroke | mm | 330 | |
| Screw speed | rpm | 160 | |
| POWER UNIT | Hydraulic system Pressure | MPa | 17.5 |
| Pump motor power | KW | 45/57 | |
| Heater power | KW | 22 | |
| GENERAL | Oil tank capacity | L | 630 |
| Machine weight | T | 15 | |
| Machine dimensions (L*W*H) | m | 7.2*1.65*2.3 |
Please feel free to consult us to know more information.
Thanks~
