Audited Supplier
9-26 Centrifugal Fan
Iron
for Manufacture
Centrifugal
High Pressure
CE
Q235
2900r/Min
Centrifugal
1 Year
Centrifugal Fans
Video Technical Support
Customers' Requirements
4112-4603PA
AC
OEM
Centrifugal Fan
Motor, Other
380V/220V
Industrial Equipment
4kw
zhenton
Export Standard Wooden Box
355*395*435
Henan, China
4101960
Product Description
9-26D type meltblown cloth special centrifugal high-pressure fan 380V ventilation extraction dust removal industrial paint spraying boiler
9-26 High Pressure Air Blower Centrifugal Fan is generally used for high-pressure forced ventilation. It can also be widely used to transport materials and transport gases that are non-corrosive, non-spontaneous, and do not contain viscous substances. The medium temperature generally does not exceed 50, and the maximum does not exceed 80; the dust and hard particles contained in the medium do not exceed 150mg/m³.
This series of fans is a single suction type. The "left" or "right" air outlet can be made into 6 angles: 0°, 45°, 90°, 135°,
180°, and 225°, and can be customized according to the customer's actual conditions. Special customization is required.
This series of fans is a single suction type. The "left" or "right" air outlet can be made into 6 angles: 0°, 45°, 90°, 135°,
180°, and 225°, and can be customized according to the customer's actual conditions. Special customization is required.
Product Brand | Zhenton | Power supply voltage | 380 V/220V |
Product model | 9-26 | Fan total pressure | 4112-4603pa |
Transmission mode | A | Air flow direction | centrifugal |
Speed | 2900r/min | Power | 4kw |
Insufficient air volume of the fan | 1,The strction durct i's not large enough or the fan intet is not equipped with a redueingInterface; 2, The power supply voltage is low or reversely connected; 3, The alr suction duct is too long,has too many elbows er the alr volume of the equlpped fan istoo small; 4, The mpeller is too olly; 5, The air duct connection port is leaking. | ||||||
The fan vibrates violently | 1, The impeller is deformed or unbalanced; 2, The fountaton bolts areloose,causing resonance; 3, Theimpeller posttioning bolt or the clamplng wheal bolt is loose. | ||||||
Motor temperature is too high | 1, The density of the gas delvered by the fan is too high,which increases the pressure andoverloads the motor; 2, The input voltage is too high or too lows; 3, The low rate is too large or the negative pressure is too high; 4, The square cross section of the power sulpply line wires is too small. | ||||||
The air output is too small | 1, The impeller rotation direction is reversed; 2, The speed is not enough; 3, The alrinlet or outtet or plpe is blocked; 4,The gap beween the impeller and the air inlet is too large. | ||||||
Zhengzhou Zhengtong Fan Manufacturing Co., Ltd.
Zhengzhou Zhengtong Fan Manufacturing Co., Ltd.is a professional fan manufacturer integrating R&D, manufacturing, and sales. Our company has advanced production equipment and professional technical research and development personnel, innovative productdesign, fine technology, stable performance, and excellent quality. Zhenton Fan has been committed to the development and production of more than ten product series including fog cannons, industrial centrifugal fans, Anticorrosive high-temperature fans, industrial workshop cooling fans, and smoke extraction fans. Zhenton Fan insists on providing highly customized solutions according to the different requirements, including single machine and complete equipment Zhenton Fan always keeps close cooperation with customers and provides customers with high-quality products and professional services at any time. Zhenton Fan is expanding its domestic market share while actively expanding its overseas market at present, our products have been exported to the United States, Germany, The United Kingdom, Russia, Australia, Mexico, Spain, South Korea, Thailand, Indonesia, India,Vietnam, Uzbekistan, Kazakhstan, South Africa, the United Arab Emirates, Saudi Arabia, Cameroon, Turkey, Hungary, Romania and other countries and regions.
Anyquestions, welcome to contact us, we ill be always help you and support you.
Q1: Why should you believe our quality?
A1: More than 13 years experience of R&D, manufacturing and sales, founded since 2009;With IS09001certificates.
Q2: Why should you buy from us not from other suppliers?
A1: More than 13 years experience of R&D, manufacturing and sales, founded since 2009;With IS09001certificates.
Q2: Why should you buy from us not from other suppliers?
A2:
1.Professional manufacturer of fan for over 20 years
2.Directly fan factory, with experienced engineer and after service teamsupport
3.Support for deep customization
Q3: May I know how soon I can get the machine after I transfer the deposit?
A3: Usually, if the quantity is less than 20 units, we can finish the production in 10-15 days. We will try our best tooffer the
machines to you as soon as possible.
1.Professional manufacturer of fan for over 20 years
2.Directly fan factory, with experienced engineer and after service teamsupport
3.Support for deep customization
Q3: May I know how soon I can get the machine after I transfer the deposit?
A3: Usually, if the quantity is less than 20 units, we can finish the production in 10-15 days. We will try our best tooffer the
machines to you as soon as possible.
