Wide voltage input.

Intelligent PID control loop

Four works type: open loop control, closed loop speed control, open loop and closed loop torque control

External potentiometer, external 0 to 5 VDC analog, pulse command control mode, the RC control mode

Safety of forward & reverse control, four quadrant operation, support regeneration

Maximum current limit.

4 input port, the function may be defined as analog input, pulse input or digital input function

Over-current, overheating, overvoltage, undervoltage, short circuit anomalies such as starting protection      
function.

2 MOS open drain circuit output , generally as 24 v 1 a output (maximum load capacity of 40 v 1 a), can be used
to control relay coil or other attachment

LED status indicator, fault alarm output.

Output current inspection function: The driver monitors the real tiME

Supply voltage

10 to 50 VDC

Continuous working current 13 A

peak current 15 A.

Out + 5 VDC power supply (power supply to encoder)

5VDC.20 Ma.

Analog input range

0-5 VDC.

Pulse input range

500 hz - 5000 hz

Duty cycle input range

20% -- 80%

RC signal

PWM signal: RC remote control receiver output signal

Digital output interface

2 road, ope drain, maximum load capacity of 40 V   1 A.

Temperature protection status

70  overheating protection to reduce the output, 85  stop output.

Working environment temperature 25  - + 60

Environment humidity: relative humidity  80 .

input frequency range f≤1 KHZ

recommended to use 250 Hz frequency

Size: L * W * H

90 mm * 75 mm * 35 mm

wEIGHT

185G