Audited Supplier
Coated Abrasive Belt Splicing Tape for 16mmx100m 67 degree for belt Joint
Coated splicing tapes are produced by applying an exact thickness of dry, thermosetting adhesive to the yarn surface of the tape. The expected results when using this tape are reduced splice thickness, increased joint consistency, reduced labor and a decrease in solvent usage.
Surface Conditioning Sanding Belt
Item No.: YH2201
Material Origin: USA
Color: Yellow,Red,Purple,Blue, Green,Woven
Note: Tape Storage and Shipment: Coated tapes are shipped in insulated cartons with dry ice. Rolls are individually packaged, with a desiccant, in a sealed plastic bag. To assure a shelf life of 90 days tape, must be stored at -29°C (-20°F) or lower. Please consult Customer Support for complete details about our products.
First, butt (flat then) belts have the following advantages over belts:
1, reduce the production cost of the belt. Eliminate the process and cost of diamond grinding wheel belt joint;
2, the belt can run in both positive and negative directions, so that the life of the belt is increased;
3, connector for lap, not easy to detach, greatly reduce the accident rate;
4, polished and smooth.Especially when grinding composite plate and decorative plate, there is no tremor pattern on the surface;
5, the appearance of the belt is more beautiful, more professional, more popular with customers!
Second, the pressure
Grind and blow clean the belt that has been dried at room temperature for 30 minutes.Attach the tape to the edges of the milled and glue-coated substrate.After hot pressing on the blinding machine, the pre-adhesive tape is pressed on the blinding machine in order to prevent adhesion of the isolating paper.(as shown in figure)
Stamping time: 10-15 seconds
Temperature: 50 ºC-70 ºC
Pressure: 2000-3000 psi (psi)
1) Are you factory or trading company ?
We are a professional manufacturer specialized in abrasive papers, abrasive belts, abrasive rolls, non-woven abrasives etc. for years. You are warmly welcomed to have a on-the-spot investigation to our factory.
2) Can I print our own logo on our products?
Of course you can just send us the blueprint.
3) Is sample order accepted ?
Yes, sample order is accepted. You can place a trial order to evaluate the product quality.
4) How long is your delivery time?
Generally it is 3~10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
5) What is your terms of payment ?
Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% ~50%T/T in advance, balance before shipment.
6) How to insurance our money for our first order ?
We have add into the TRADE INSURANCE in Alibaba. You can pay by Trade Insurance to protect your every money.
If you are interested in our abrasive tools, please Send Inquiry to us by the follows:
Thank you for your kind inquiry!
