Audited Supplier
1.Technical data of suspension insulators high voltage
Type | Rated voltage (kV) | Rated mechanical tension load (kN) | Structure height (mm) | Min nominal creepage distance (mm) | 1min power frequency wet withstand voltage (kV) | Full wave lightning impulse withstand voltage peak value (kV) |
FXB1-15/70CT | 15 | 70 | 370±15 | 455 | 65 | 140 |
2.Materials of suspension insulators high voltage
Suspension insulators high voltage is the most widely used basic components in high voltage transmission and distribution power system, it is use for isolation of live part. Composite insulator is use epoxy rod and rubber sheds external insulation polymer composite insulators. Compare with traditional ceramic and glass insulators, it is more lighter(only about 1/4 to 1/8 of traditional insulator), higher strength(10 times higher than high-strength porcelain insulator), less clearing(anti-water). And it also overcome the short life problem of conventional polymer materials, the life will be several decades. It is the new product in power system.
Suspension insulators high voltage is suitable for 15KV and below generation, transmission, substation and distribution system for the insulation of live parts.
