Audited Supplier
on Line
1year
500mm
900kg
Water Pump Testing Equipment
Mechanical Load
Dynamic Load
Digital
Computer Control
0-100Kg
AC380V
0.5%
0.2%
0.2%
0.5%
0.5%
0.5%
Positive and Negative1
Changniu Technology
Dust-Free Packaging + Sturdy Wooden Crates
Hangzhou, China
Product Description
The condensate pump test system is composed of flow rate speed measuring instrument, pressure head measuring instrument, electrical parameter measuring instrument, flow pressure sensor, related pipelines, test vessels and related supporting instruments. The pump test system is a special test equipment for testing the performance of water pumps, the system adopts high-precision flow sensors and high-precision pressure transmitters and electrical parameters, which can meet the requirements of various models and different grades of pumps for accurate measurement of flow, head, voltage, current, input power, efficiency, etc. The system has high test accuracy, good repeatability, strong operation stability, high parallel efficiency, long service life and easy work.
Test items:
Performance test, cavitation performance test, durability test, flow, speed, current, power, pressure (head), efficiency, temperature rise, etc.
Suitable for:
Submersible pumps, deep well pumps, centrifugal pumps, pipeline pumps, self-priming pumps, chemical pumps, screw pumps, household booster pumps, sewage pumps, automobile fuel injection pumps, automobile scrubbers, automotive cooling water pumps, motorized sprayers, fish tank pumps, high-pressure washers, washing machines (dishwashers), etc.
Specifications:
The indicators of the system conform to GB/T3216-2005 "Test Methods for Centrifugal Pumps, Mixed-Flow Pumps, Axial Flow Pumps and Vortex Pumps" and GB/T12785-2014 "Test Methods for Submersible Electric Pumps".
Test Accuracy:
Flow ± 0.5%, Pressure ± 0.2%, Speed ± 0.2%,
Voltage± 0.5, current ±0.5, power±0.5, temperature±1°C
Open test setup:
1. Mainly carry out factory test and type test for submersible electric pump.
2. The pump test system adopts a standard test device with an open structure, and the test circuit ensures that the liquid flow through the measurement section has axisymmetric velocity distribution, isostatic pressure distribution and no vortex caused by the device.
3. The open pool is located on the ground or under the ground, and the depth and volume of the pool should meet the flow rate of the pump without vortex.
4. The pipeline measurement loop is composed of measuring pipeline, pressure device, flow sensor, regulating valve, quick connector, etc.
5. The pump head measurement shares a set of measurement circuits, the pointer pressure gauge is displayed at the same time, and the connection between the pump outlet and the measuring pipeline adopts a quick connector.
Closed test set:
1. Mainly for the factory test, type test and cavitation test of various centrifugal pumps, mixed-flow pumps, axial flow pumps and vortex pumps.
2. The standard test device with closed structure is adopted, and the test loop ensures that the liquid flow through the measured section has axisymmetric velocity distribution, isostatic pressure distribution and no vortex caused by the device.
3. The closed-type test device is located on the ground, which is composed of cavitation cylinder, steady flow cylinder, oil and gas separation, constant pressure chamber, pipeline system, vacuum gauge, vacuum pump, valve (or electric valve), etc.
