Audited Supplier
Aluminium formwork is a construction system for forming cast in place concrete structure of a Building. Adto formwork system provides aluminium formwork for RCC, load-bearing, multi-storeyed buildings and enables the vertical and horizontal systems to be poured in the same operation. This increases efficiency, and also produces an extraordinarily strong structure with excellent concrete finish.
Product more details:
| Material type | Complete extrusion | |
| Thickness of panel | 4mm | |
| Thickness of frame | 8mm | |
| Height of frame | 65mm | |
| Average weight | 22-25KG/Sqm | |
| Raw materials | Aluminium alloy 6061-T6 | |
| Standard wall panel width | 50mm to 600mm | |
| Standard slab panel size | 400x1100mm | |
| Surface treatment | Mill finish or Powder coating as client's requirement | |
Advatages of aluminum formwork system:
Light Weight
Made of aluminum alloy 6061-T6,it's average weight is around 25kg/, easy to be carried manually
Flexible Operation
The system can be lifted by tower crane as a whole,or dismantled and installed by labors.It allows casting of wall, beam, slab and staircase monolithically or by two stages.
Long reusing life
The panel is made of extrusion profiles which is high strength and not easy to be deformed or oxidated, the reusing time can reach up to 300 times.
Save labor cost
Panels are connected by pin&wedges, un-skilled labors can install and dismantle the system by hammers only.
Shorten construction period
Early-stripping application improve the system cycle and save cost for users.After pouring of concrete, wall panels could be stripped in 12 hours and slab panels 24-36 hours, finish one floor by four days only.
Improvement of work environment
The system fabricated at factory and requires only installation at site keeps the work environment clean and safe.
Our factory:
Project cases:
Product packing and delivery:
Exhibition:
Certificates:
FAQ:
1.May I use this set of formwork for another project?
Yes,there are around 70% of standard panels can be reuse for next project.
2.What's your payment terms?
T/T 30% in advance and 70% balance against copy of BL, L/ C 100%, or negotiate according to the order status.
3.Do you have pre-mocking up service?
4.If I don't know well about your system,How to do?
Do not worry,professinal technical support will be provided by free.
We are factory
We have professional engineers
We have design team for graphic design & 3D model design
We support custom service: logo, package, panel size, Engineering plan...
