Audited Supplier
SA8000
Hot Vulcanization
Solvent
Conveyor Belt
Hot Vulcanizing
Non Flammable
Black
Hot Vulcanizing Solution
High Bonding Strength
Conveyor Belt Splice
BAI-OTT
Wooden Box
China
Product Description
Conveyor belt hot joint vulcanization cement SA8000 for steel cord belt
Hot vulcanizing solution SA8000 is non-flammable and is used for hot vulcanizing seamless joints for seel cord conveyor belts in conveyor systems.
1. The belt and steel wire belt are peeled off with layered peeling hook and vice, and then the joint part is polished(four kinds of joint methods).2. The hot vulcanizing solution is coated on the steel cord conveyor belt and the uncured tie gum and the uncured cover gum joint part.
3.The uncured tie gum is laid on the surface of the wire rope and the uncured cover gum is laid on the outer surface of the uncured tie gum and then pressed and vulcanized.
4. It is suggested that several knives should be cut on the uncured tie gum with wallpaper knife before vulcanization to avoid its bulging.
Feature:
1.Enhances vulcanization of belt splices
2.Adds building tack to the uncured splice materials and conveyor belt splice
3.Brush able consistency for ease of application and good penetration
4.Can be used over a variety of adhesive systems.
5.Use for Natural Rubber (NR), Polyisoprene (IR), Styrene-Butadiene (SBR), Polybutadiene (BR), Polychloroprene i.e. - Neoprene(CR) rubber belt splices
6.Using the unique formula,Hot Vulcanizing Solution have the high thermal stability,it is water-resistant,oil- resistant, aging-resistant.
