Audited Supplier
SPS-2D
Square Ramsey Run-off Switch
Sps-2D
30°
60°
Manual Reset
VKSELE
Carton
3kg
Zhejiang, China
Product Description
| |
| |
| |
This product detects conveyor belt deviation to prevent material overflow and other malfunctions. It is commonly used intransportation systems across industries such as mining, power, and chemical engineering...
Working principle:
The two-stage run-off switch is installed on both sides of the conveyor, when the conveyor runs out of alignment, the conveyor belt touches the switch stick to make the stick deflect, when the stick deflection angle reaches the first level switch angle,the switch will send an alarm signal. The ROS-2D two-stage runout switch has a reliable conveyor belt runout detection functionand a cast aluminium housing.
Product Parameters :
| Product Name | Square Ramsey Run-off switch | Model | SPS-2D |
| Protection | NEMA4 | Reliability | >10^6 times |
| Limit Angle | 70° | Reset Mode | Manual Reset |
| Action force | 10KG | Normal alarm angle | Adjustabie within deviation of 22.5 from vertical direction |
| Number of contacts | 1NO 1NC /2NO 2NC | Contact Capacity | 24-380V AC/DC |
The anti-deflection switch can be fixed at the top or boltom of the longitudinal beam of the conveyor, and the action rod is about 25 mm When the running tape is deflected, the edge of the tape drives the stick to rotate and squeeze to make it tilt, if the stick tilt more than the from the edge of the tape, usually installed on both sides of the tape at a distance of0,.3-2 m from the head or the tall, first action angle, the switch issues a set of switch signals, if the slick continues to tilt more than the second action angle.another set of switch signals is output, The two sets of switch signals can be used for alarm or stop respectively, After the tape machine has been reset to normal operation,the stick will be automatically reset.
