Audited Supplier
High Quality Copolymer Coated Steel Tape For Cables
standard seaworthy export packing. Usaully one 20ft container could load 20-22tons.
Port
wuhan port-High Quality Copolymer Coated Steel Tape For Cable
. No. | Item | Unit | Values | |||
1 | appearane | -- | Straight,smooth,plain | |||
2 | size | length | m | 1000~5000 | ||
width | mm | 12~1100 | ||||
3 | thickness | steel base | mm | 0.200±0.015 | ||
0.155±0.010 | ||||||
0.120±0.010 | ||||||
film | side A | mm | 0.058±0.013 | |||
side B | ||||||
tape | mm | 0.310±0.015 | ||||
0.260±0.015 | ||||||
0.22±0.015 | ||||||
4 | Standard | AISI,ASTM,GB,JIS | ||||
5 | Technique | Hot Rolled | ||||
6 | Surface Treatment | Chroming | ||||
7 | tensile strength of tape | mpa | 310~390 | |||
8 | elongation at break | % | 20~35 | |||
9 | bond strength between steel tape and coating | side A | N/cm | ≥6.13 | ||
side B | ||||||
10 | bond strength of heat seal of tape | N/cm | ≥17.5 | |||
11 | cutting strength of heat seal of tape | -- | before breakdown happens to coated steel tape or damage happens between film and steel, damage never happen to the heat seal area. | |||
12 | bond strength of tape after putting into water, 68±1 centigrade,168h | side A | N/cm | ≥6.13 | ||
side B | ||||||
13 | jelly resistance, 68±1 centigrade, 168h | umbrella brand | -- | no buld, no separation | ||
WT-103 | ||||||
14 | dielectric strength, DC 2KV, 1 min | -- | without breakdown | |||
15 | corrosion resistance, 0.1 mol/L, HCL, 480h | grade | 8 | |||
More information for Copolymer coated steel tape
1. Propertities:
EGE copolymer coated steel tape consists of a steel tape coated on both sides with an adherent ethylene copolymer. The copolymer exhibits excellent
adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density polyethylene, it bonds to low,
linear low, medium and high density polyethylene. The steel is low carbon, electronic chrome-coated steel tempered to T-
2 condition for excellent formability and fabrication characteristics.
The coating line, specialized in film coating.
The slitting line, desined for slitting of narrow and thin coils in soft conditions, ensures:
l No sticky windings and no staining;
l Less manipulation after sltting, less risk for damage and contamination;
l Uniform tension throughout the whole cil via most accurate control systems;
l Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.
3. Packing conditions:
Packing details:
l Normallyfor aluminium strip, 2022MT can be loaded into 20 foot container,we suggest to use 20 foot container, the sea freight rate is much
cheaper than 40 foot container.
l the packing is very strong, which has 3 lays, thick fiber, foam, plastic,enough drying agent, suitable for long distance sea transportation.
l We use wooden pallet and steel pallet according to customer request;
l Wooden boxes will be used in the outside packing.
l We have fixing in the container to avoid any damage during the transportation.
Packing picturs:
Other Products
Reliable quality,reasonable price and prompt delivery are insured to be offer to you.
Contact:Name: Carey zhu
Website: http://kuayuecable.en.made-in-china.com
