Audited Supplier
Corrugated Sidewall Flap Rubber Conveyor Transmission Belt Heavy Duty
Sidewall Conveyor belt has been designed with two corrugated sidewalls and cleats molded to cross-rigid base belt which can carry heavy product product loads up to the inclined angle of 75°.
Sidewall conveyor belt can be used for horizontal, sloping or vertical conveyance and it is one of the most effective ways of elevating materials in a confined space. The economic goal can be achieved by single belt operation and wide range materials can be handled in cases of limited space and strict requirements of no transfer point, low maintenance and big capacity.
Feature:90-degree inclination
1.High load
2.Save space
3.Low maintenance
4.Effectively prevent material scattering
Sidewall conveyor belt is based on the following main components:
(1) Cross-stabilized Base Belts
(2) Sidewalls
(3) Cleats
The Base Belt: The base belt is designed to bend efficiently in a longitudinal direction and has greater rigidity in a transverse direction by utilizing reinforced fabrics with monofilament, creating a fabric carcass of high tension.
Cross Rigid Conveyor Belt can be deflected from the horizontal to an incline or vertical and back again without bowing or sagging. These deflection points as well as the belt returning on free lateral space by snub idlers definitely require the cross-rigidity of the base belt.
The designed mono-filament fabrics provide better return-side support. No wear and tear of cleat and cover rubber is available with various compounds like abrasion resistance oil, heat, and flame resistance.
DIN 22102
JISK 6322
AS 1332-2000
SANS 1173:2005
BS 490
| Standards | Cover Rubber | Adhesion | ||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
| DIN 22102 | Mpa | % | mm3 | N/mm | N/mm (>1.5mm) | N/mm |
| DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | 5 |
| DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | 5 |
| DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | 5 |
| DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | 5 |
| Standards | Cover Rubber | Adhesion | ||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
| RMA | Mpa | % | mm3 | N/mm (≤1.6mm) | N/mm (>1.6mm) | N/mm |
| RMA-I | 17 | 400 | 200 | 3 | 4.4 | 4 |
| RMA-II | 14 | 400 | 250 | 3 | 4.4 | 4 |
| Standards | Cover Rubber | Adhesion | ||||||||||
| Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |||||||
| AS 1332 | Mpa | % | mm3 | N/mm (≤1.9mm) | N/mm (>1.9mm) | N/mm | ||||||
| AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 | ||||||
| AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 | ||||||
| Carcass | fabric type | Strength per ply (N/mm) | Thickness per ply (mm) | Cover Thickness (mm) | No.of Ply | Belt Width (mm) | Length per Roll (m/Roll) | |||||
| Top Cover | Bottom Cover | |||||||||||
| NN | NN100 | 100 | 0.70 | 3 3 3.2 4 4.5 4.8 6 6 6.4 7.9 8 9.5 | 1.5 3 1.6 2 4.5 1.6 2 6 3.2 3.2 4 3.2 | 2-10 | 300-12000 | 20-100 | ||||
| NN125 | 125 | 0.70 | ||||||||||
| NN150 | 150 | 0.75 | ||||||||||
| NN200 | 200 | 0.90 | ||||||||||
| NN250 | 250 | 1.15 | ||||||||||
| NN300 | 300 | 1.25 | ||||||||||
| NN400 | 400 | 1.50 | ||||||||||
| EP | EP100 | 100 | 0.75 | 2-8 | ||||||||
| EP125 | 125 | 0.75 | ||||||||||
| EP150 | 150 | 0.85 | ||||||||||
| EP175 | 175 | 0.85 | ||||||||||
| EP200 | 200 | 1.00 | ||||||||||
| EP250 | 250 | 1.20 | ||||||||||
| EP300 | 300 | 1.35 | ||||||||||
| EP350 | 350 | 1.50 | ||||||||||
| EP400 | 400 | 1.65 | ||||||||||
| EP500 | 500 | 2.00 | ||||||||||
| CC | CC56 | 56 | 1.10 | 3-12 | ||||||||
Hebei TRX Rubber Products Co., Ltd is a leading professional manufacturer of conveyor belts & conveyor accessories in China. The main workshops cover 20,000 square meters in the total 60,000 square meters of the plant. The applied technology and equipment in the advanced production lines are state of the art in the industry. The sales headquarters is located in the capital of China, Beijing with branches in domestic and abroad.
It specializes in following three series: 1) Heavy-duty Conveyor Belt, including universal EP/NN and CC Belt, Chevron Belt, Oil Resistant Belt, Abrasion Resistant Belt, Heat Resistant Belt, Fire Resistant Belt, Chemical Resistant Belt, Sidewall Belt, Flat Transmission Belts, 2) Rubber Sheets, including SBR, NBR, NR, CR, EDPM, Rubber With Insertion 3) Conveyor accessories. These three series of products conform to RMA, DIN, ASTM and ISO specifications.
Its products, honored with "The most Advanced level of Products" by the Committee of Science and Technology, have been widely used in mining and quarrying, power stations, steel plants, bulk cargo terminals, cement industry, and other material handling fields. With great success in domestic market, it has been focusing on global market with several hundreds of foreign valued customers in Asia, South America, North America, Africa and Europe.
The company mission:
2. Engage in complete solutions with conveyor belting and power transmission belting.
3. Persist in technology improvement and quality control in the whole process of production and service.
