Audited Supplier
| Product Description |
| *High Torque to inertia ratio&up to 25000Nm/kgm² |
| *Fast dynamic response, time constant <20ms |
| *Wide speed adjusting&feedback up to 1000:1 |
| *Steady speed precision up to 0.5% |
| *High overload, 2N.m/30s, 3.5N.m/10s |
| *Small volume and light weight |
| *Silent, the lowest noise is only 45dB(A) |
| *Protected with IP65, Class F insulation |
Work Environment: |
| 1. Altitude less than 1000M. 2. Environment temperature: +5ºC~+40ºC 3. The most moist month average relative humidity should less than 90%, and this month's average lowest temperature should less than 25ºC. |
| Specification for KY80AS0204-15RV50-25 | |
| Rated voltage | DC24V |
| Rated power | 400w |
| Rated speed | 60rpm |
| Rated current | 22A |
| Rated touque | 38N.m |
| Peak Torque | 80N.m |
| Line Resistance | 0.05Ω (20ºC) |
| Rotor Inductance | 0.56mH |
| Torque Constant | 0.06N.m/A |
| Rotor Inertia | 281kg.m2*106 |
| Mechanical Time Constant | 0.6ms |
| Electrical Time Constant | 0.5ms |
| Weight | 8kg |
| Gear ratio | 1:7.5/10/15/20/25/30/40/50/60/80/100 |
- Standard export carton with sponge
- Size : base on the order
- Weight : base on the order
- Detail data will be confirmed before shipping
| Pre-service | After Sales Service |
| Inquiry and Consult Support Sample testing Support View our Factory | Help instal and use the product 24 hours online problem solving |
Q: What kind motors you can provide?
A: For now, we mainly provide permanent magnet brushed dc motors (including low power and high power dc motors) with power range in 20~5000w.
Q: Is there a MOQ for your motor controller?
A: There is no MOQ requirement. But the more the better.
Q: How do you ensure the product quality?
A: We have strict test system in every link of material selection, production and final product, packing according to ISO9001 management.
Q: Is it possible for you to develop new controllers if we provide the tooling cost?
A: Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we'll make our evaluation to see if we can arrange or not.
