Audited Supplier
SOPZX-001
Cantilever Type
Resistance Strain
4-Wire
Analog Type
High Comprehensive Precision
Normal Wirewound
Alloy Steel
IP65
CE
Customized
5-15V
150%
0.5%F.S.
0.5%F.S.
1PC
SOP
Standard
0-50T
China
Product Description
The elastic element is a whole round shaft, which is compact in structure and simple in geometric shape, and is easy to process with high dimensional and positional accuracy. The shaft section has strong torsion resistance and bending resistance, and the stress at the neutral axis of the shaft pin is the largest; When the important official pin is subjected to vertical and horizontal bending, the section with zero bending moment is in the same section; It is easy to assemble with related load-bearing parts and convenient to use. Accept customization, and can customize different solutions according to different needs of customers.
Product features:1.Available in capacities from 0 to 100T
2.Environmental Protection IP65 with complete hermetic sealing
3.Alloy steel material, high strength, good load tolerance, suitable for severe environment
4.Provided with a certificate of conformance and full-scale calibration
5.Temperature compensation technique ensures the high accuracy in different environment
6.Custom design to meet different applications
| Parameter Table | |||
| Measuring Range | 0-100T | Material | Alloy steel |
| Output Sensitivity | 1.0±0.05mV/V | Resistance | 700/±5Ω |
| Zero Output | ±2%F.S. | Insulance | ≥5000MΩ/100VDC |
| Non-Linear | 0.5%F.S. | Operating voltage | 5-15v |
| Hysteresis | 0.5%F.S. | Operating temperature range | -20-80ºC |
| Repeatability | 0.5%F.S. | Safety overload | 150% |
| Creep(30min) | 0.5%F.S. | Ultimate overload | 300% |
| Temp.effect on output | 0.05% F.S. / 10ºC | Cable specification | Φ5x3m |
| Temp.effect on zero | 0.05% F.S. / 10ºC | Cable ultimate tension | 10kg |
| Response frequency | 10kHz | TEDS | |
The built-in transmission board can directly transmit the force on the shaft to 4-20mA or other industrial signals, and adapt to the needs of different working conditions. Products are widely used in ships, cranes, electronic scales, agricultural irrigation machinery, load-bearing vehicles and other equipment, and customized axle pin dynamometer products with different requirements for different customers. A shaft is a special load cell, or the load cell itself is an integral carrier. The axle pin weighing sensor used in electronic hanging scale and traveling electronic scale is a typical representative of this structure.
