Audited Supplier
CL-HFT
Electrical Winding Insulation,Wind Power
OEM
PE/EVA
Selectable
-45-125
Insulation Sleeve & Tube
IATF 16949
Carton
Customizable
Changzhou
4009220000
Product Description
Basic information
Product Description
inner wall slotting heat shrinkable tube for wind power uses specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance make them widely used in the field of electronics, communication, automotive, pipeline protection and so on. It is widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, gas pipeline and marking for other products.
| Item | CL-HFT | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Radial Shrinking Ratio | 2:1 3:1 | |
| Longitudinal Shrinking Ratio | ±5% | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Aging in circulating-air oven | (158±1.0)ºC,7days | |
| After aging | Tensile Strength | ≥7.3MPa |
| Elongation Ratio | ≥100% | |
| Dielectric Voltage Withstand | 600V | |
| Corrosion of Bare Copper | ≥15kV/mm | |
| Flammability | VW-1 | |
| Concentricity | ≥65% | |
Product Description
inner wall slotting heat shrinkable tube for wind power uses specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
The properties of environment-friendly, flexibility flame retardant, quick shrink and stable performance make them widely used in the field of electronics, communication, automotive, pipeline protection and so on. It is widely applied for connecting or end-handing, electric wire, insulating and harness of electric wire, corrosion and rust-proof of metallic rods or tubes, gas pipeline and marking for other products.
At present, the product model of our company is as follows.
Special wall thickness can be customized
| Model | Specifications | color | KC |
| CL-HFT | Ф13.0/6.0 | black | KC |
| CL-HFT | Ф17.0/8.5 | black | KC |
| CL-HFT | Ф18/9.0 | black | KC |
| CL-HFT | Ф20.0/10.0 | black | KC |
| CL-HFT | Ф22/11.0 | black | KC |
| CL-HFT | Ф25.0/12.5 | black | KC |
| CL-HFT | Ф30.0/15.0 | black | KC |
| CL-HFT | Ф35.0/17.5 | black | KC |
| CL-HFT | Ф40.0/20.0 | black | KC |
| CL-HFT | Ф45/22.5 | black | KC |
| CL-HFT | Ф50/25 | black | KC |
| CL-HFT | Ф60.0/30.0 | black | KC |
| CL-HFT | Ф60/30 | black | KC |
| CL-HFT | Ф70/35 | black | KC |
| Special specifications, special colors, special packaging, etc., can be customized. | |||
