Dimensions: 34mm*34mm (welcome customize dimension or type)
Inside the sensor is a set of half-bridge strain gauges, which can be used in the following three ways:
One: use a sensor with an external resistor to form a full bridge measurement, the range is the range of one sensor: 50KG
Two: use two sensors to form a full bridge measurement, the range is the sum of the ranges of the two sensors: 50KG*2.
Two: using four sensors to form a full bridge measurement, the range is the sum of the ranges of four sensors: 50KG*4
| Range (kg) | 50 | ||
| Comprehensive error (%F.S) | 0.3 | Rated output temperature drift (%F.S/10°C) | ≤0.15 |
| Sensitivity (mv/v) | 1±0.15 | Zero output (mV/V) | ±0.3 |
| Nonlinear (%F.S) | 0.2 | Input resistance (Ω) | 1000±10 |
| Repeatability (%F.S) | 0.1 | Output resistance (Ω) | 1000±10 |
| Lag (%F.S) | 0.2 | Insulation resistance (MΩ) | ≥2000(100VDC) |
| Creep (%F.S/3min) | 0.1 | Recommended excitation voltage (V) | 5~10 |
| Zero drift (%F.S/1min) | 0.1 | Operating temperature range (°C) | -10~+50 |
| Zero temperature drift (%F.S/10°C) | 0.3 | Overload capability (%F.S) | 150 |







Audited Supplier









