Audited Supplier
RS485
Surface Mounting
Resistive
Contact
Analog Type
Customize
Stainless Steel
Humidity
IP67
ISO
Customized
-40deg~+125deg
0 - 100% Rh
85cm, 1m, 1.5m, 2m, etc
Ceramic Case, Stainless Steel Probe, ABS Probe
PVC Cable, PU Cable, Silicone Cable, etc
±2 @2-100% Rh
±0.2 @0-90ºC
3V to 5.5V
Gray, Black, White
One Wire
Vcc, Gnd, Scl, Sda
0508 Terminal, Od2.5mm Stereo Plug
I2c
Waterproof
Accept
Senstech
PE Bag, Paper Carton
0-20mA
Guangdong, China
9025191010
Product Description
Accept customize all kinds of temperature sensor probe, please tell me your requirments!!!
| Sensor | RTD PT100, NTC 10K, DS18B20 |
| Modbus-RTU | R3485 |
| Humidity range | 0-100% RF |
| supply voltage | 12-24V |
More Specifications
| Sensor chip | NTC 10K, DS18B20 RTD PT100/PT1000 transfer RS485 |
| More chip | SHT45, SHT31, SHT30, SHT20, SHT21, SHT35, SHT40, DHT11, DHT22, RTD PT100/PT1000 transfer 0-20mA, RTD PT100/PT1000 transfer 4-20mA etc |
| Cable | Flat cable, TPE Flat cable, PVC cable, Silicone cable, TPE Jacket cable, PVC Jacket cable, Stainless braided cable, or another |
| Probe | Stainless steel probe, Ni-copper probe, PE case, Ceramic Case, Brass probe, ABS, or customized |
| Length | 0.5m, 1m, 1.5m, 2m, 5m, 10m, 100m, or customized |
| Connector | Molex, XH, PH, JST, SM, Fork terminal, 0508 terminal, Pin terminal, M12 Aviation plug, Waterproof connector, M5 connector, Mini Type C plug,OD6.35mm stereo plug, Terminal blocks, OD2.5mm Stereo plug, OD3.5mm Stereo plug, RJ11, RJ12, RJ45, etc |
Product Introduction
HOW TO ORDER:
Please feel free to tell us your requirements about
a. sensor spec ?
b. probe size ?
c. cable length ?
d. working environment or temperature range ?
e. any other special requirement ?
Please feel free to tell us your requirements about
a. sensor spec ?
b. probe size ?
c. cable length ?
d. working environment or temperature range ?
e. any other special requirement ?
Welcome to contact us for more information and prices!!!
Please click here to get more informations......This SHT35 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT35 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT35 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT35 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT35 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT35 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
MORE OPTIONS:
Accept customize all kinds of temperature sensor probe, please tell me your requirments!!!
The SHT35 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT35 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT35 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
The Arduino SHT35 waterproof temperature & humidity sensor adopts dual waterproof protection techniques. The inner PCB has perfusion and encapsulation protection, and the probe enclosure is made of PE waterproof materials. This is a special waterproof breathable material that allows water molecules to seep in while blocking water droplets from seeping in at the meantime. The sensor won't be damaged even after a long time submerge in the water. There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Application:
1. HVAC
2. Consumer goods
3. Weather stations,
4. Test & measurement
1. HVAC
2. Consumer goods
3. Weather stations,
4. Test & measurement
5. Automation Medical
6. Humidifiers
6. Humidifiers
7. Greenhouse
8. Cold-chain transportation
and so on.....
and so on.....
MORE OPTIONS:
Accept customize all kinds of temperature sensor probe, please tell me your requirments!!!
