Audited Supplier
PTFE
High-Performance Plastics
Pumps
PTFE
Corrosion
O-Ring
2.14-2.2 g/cm3
-196~260 Centigrade
52
150~350
0.35~0.5
hdgfz
Export Carton, Pallet
full specification
China
3902100090
Product Description
Product name
Excellent corrosion resistance PTFE products
Main properties
. Excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties
Application
PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries
Technical specification
Products available:
1). PTFE skive Sheet (0.5-5mm thickness, special size can be customized)
2). Molded PTFE sheet(1-80 thickness, 100-2000mm width; 100-2000mm length)
3). Molded PTFE sheet (1-65mm thickness; Dia. 100-1000mm)
4). Full size for molded PTFE rod, extruded PTFE rod.
5). Full size for molded PTFE tube, extruded PTFE tube
6). Modified PTFE products ( fill with glass fibre, graphite, carbon etc. )
7). PTFE machined parts.
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The productssell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...
Factory key equipment:
Excellent corrosion resistance PTFE products
The superior dielectric properties especially at high radar and microwave frequencies makes PTFE widely use as an insulation material. PTFE is also works in a wide temperature from -180°C to +260°C.
PTFE is capable of much higher temperatures than many other materials.It is classed as a high performance substitute over weaker and lower melting point polyethylene.
Main properties
. Excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties
Application
PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries
Technical specification
| Property | NORM | VALUE |
| Density | ISO1183 | 2.14-2.2 |
| Tensile strength at break ( Mpa) | ISO527 | 18-30 |
| Modulus of elasticity (Gpa) | ISO527 | 0.35-0.5 |
| Elongation at break | ISO527 | 150-350 |
| Shore D | DUROMETER | 52 |
| Temperature range | / | -196-260 |
| Coefficient of linear thermal expansion | ISO11359 | 1 |
Products available:
1). PTFE skive Sheet (0.5-5mm thickness, special size can be customized)
2). Molded PTFE sheet(1-80 thickness, 100-2000mm width; 100-2000mm length)
3). Molded PTFE sheet (1-65mm thickness; Dia. 100-1000mm)
4). Full size for molded PTFE rod, extruded PTFE rod.
5). Full size for molded PTFE tube, extruded PTFE tube
6). Modified PTFE products ( fill with glass fibre, graphite, carbon etc. )
7). PTFE machined parts.
Company introduction:
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The productssell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...
Factory key equipment:
