Audited Supplier
Teflon FEP for Chemical anti-corrosion
FEP is a modified category of PTFE. It remains basically the properties of PTFE, like excellent high- low-temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50° Clower than PTFE by limit of high temperature resistance.
1. 100% virgin grade high performance resins used to resist stress cracking
2. Chemically inert to most industrial chemicals and solvents
3. Available in coiled, convoluted and heat-shrink construction
4. High thermal stability
5. Excellent UV transmission
6. Low permeability
7. Non-flammable
8. Self Extinguishing
9. Superior electrical insulation properties
10. Moisture absorption nearly zero
-. PVDF (sheet, rod, pipe, welding rods, processing parts)
-. PTFE (sheet, rod, tube, film, tape, processing parts)
-. PCTFE (rod, tube, sheet, gasket, processing parts)
-. PFA (pipe, sheet, rod, film, welding rods, processing parts)
-. FEP (pipe, sheet, rod, film, welding rods, processing parts)
-. PEEK (sheet, rod, processing parts)
-. UHMWPE (sheet, rod, processing parts)
| ID * OD (mm) | Wall Thickness | m/roll |
| Ф1.0x2.0 | 0.5 | 100 |
| Ф1.0x3.0 | 1.0 | 100 |
| Ф3.0x4.0 | 0.5 | 100 |
| Ф2.0x4.0 | 1.0 | 100 |
| Ф3.0x5.0 | 1.0 | 100 |
| Ф4.0x5.0 | 0.5 | 100 |
| Ф4.0x6.0 | 1.0 | 100 |
| Ф6.0x8.0 | 1.0 | 100 |
| Ф6.0x9.0 | 1.5 | 100 |
| Ф8.0x10.0 | 1.0 | 100 |
| Ф7.0x10.0 | 1.5 | 100 |
| Ф10.0x12.0 | 1.0 | 100 |
| Ф12.0x14.0 | 1.0 | 100 |
| Ф14.0x16.0 | 1.0 | 100 |
| Ф18.0x20.0 | 1.0 | 100 |
| Ф22.0x25.0 | 1.5 | 100 |
| ... | ... | ... |
More options for fluoropolymer tubing
FEP Tubing for heat exchanger
Production Facility
