Audited Supplier
| Electric Linear Actuator Model | DGRLT64 | |||
| Ball Screw | Screw Lead 5mm Diameter 16mm Rated Dynamic Load 1380kgf | |||
| Max.Motor Power | W | 400w Servo Motor Rated Torque 1.27Nm Rated Speed 3000rpm | ||
| Reducation | 1 | 1.5 | ||
| Max. Rated Speed | mm/s | 250 | 166 | |
| Max. Rated Thrust | KN | 1.36 | 2.03 | |
| Max. Rated Torque | N.m | 1.27 | 1.91 | |
| Axial Backlash | mm | Ground Ball Screw 0.025/ Rolled Ball Screw 0.08 (Default Rolled) | ||
| 300mm Lead Tolerance | mm | Ground Ball Screw 0.023/ Rolled Ball Screw 0.05 (Default Rolled) | ||
| Repeatable Position Accuracy | mm | Ground Ball Screw ± 0.01/ Rolled Ball Screw ± 0.02 (Default Rolled) | ||
| Limit Switch | NPN, PNP (Both are acceptable) | |||
| Inline Type | √ | × | ||
| Parallel Type | √ | √ | ||
6DOF motion platform involves a series of high-tech domains, including mechanics, servo electric cylinders, servo motors, controller, computing, sensors, spatial motion mathematical models, real-time signal transmission and processing. Therefore, the 6DOF platform stands as a symbolic representation of the technological sophistication in the field of control. It mainly encompasses the spatial motion mechanism of the platform, the servo system and the control system.
If you are familiar with electric cylinders, just choose suitable model on the product page. If you can't confirm how to choose the model, please provide following info, we will recommend appropriate model to you.
1. Thrust(kN)
2. Stroke(mm)
3. Speed(mm/s)
Otherwise, to make a quick and accurate quotation, please also confirm below info if available.
1. The mounting method of electric cylinder
A. Front flange B. Rear flange C. Side flange D.Trunnion E. Guide rod F. Rear hinge plate G. Other
2. Loading connection method
A. Outer thread B. Inner thread C. Fish eye connector D. Y type connector E. I type connector F. Floating connector G. Other
3. The mounting method of motor
A. Direct B. Parallel
Q1. Do you provide integrated flight/race simulator?
A: Yes, we do. We also provide crucial component-electric linear actuators for users who would like to construct the sim rig by themself.
Q2. I don't know how to choose electric linear actuator model for my simulator, can you suggest?
A: Yes, pls inform the stroke, thrust and speed of the actuator needed.
Q3. What are your terms of payment?
A: T/T 50% as deposit, and 50% balance payment before shipping.
Q4. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q5. How about your delivery time?
A: It'll take 10-25 days to produce the products, and 5 days by air, 30 days by sea. The specific delivery time depends on the item and quantity.
Q6: How long is the warranty?
A: 1~3 years. (upon the deal)
Q7. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
