
Product Information
DIN1.2714 has a high content of Cr. It has high hardenability, and martensitic structure can be obtained by cooling during quenching. After quenching and tempering, the overall performance is good, uniform and dense, with high wear resistance and thermal fatigue resistance, and small deformation.
DIN1.2714 | ||||||||
Chemical Composition | C | Si | Mn | P/S | Ni | Cr | Mo | V |
0.50~0.60 | 0.10~0.40 | 0.65~0.95 | ≤0.030 | 1.50~1.80 | 1.00~1.20 | 0.45~0.55 | 0.07~0.12 |

Smelting Process | EAF+LF+VD | ||||||||||||||||||
Production Process | Hot Forged+Spheroidizing Annealing&Quenching and Tempering | ||||||||||||||||||
Specification | Round Bar: Dia. 80~800; Flat Bar: 80~400mm*300~1,000mm | ||||||||||||||||||
Hardness | 40~46HRC | ||||||||||||||||||
Applications | Large pressing molds, squeeze tools, support tools, mold frames, large molds used for plastic processing in thermoplastics.compression shaft and retaining ring. | ||||||||||||||||||
Shape | Round Bar/Flat Bar | ||||||||||||||||||
Origin | Jiangyou, China | ||||||||||||||||||
Trade Term | FOB, CIF | ||||||||||||||||||
MOQ | 5 Tons | ||||||||||||||||||
Loading Port | Shanghai Port |
Company Information


Smelting | 30Ton EAF & LF & VD 1~15Ton Argon-shield ESR |
Forging | 4,500/3150/1,600 Ton Forging Press 6/5Ton Electro-hydraulic Hammer |
Heat Treatment | 21 Electric Furnaces |
Machining | 34 Sets Machining Equipments |
Physical&Chemical Test Center | 27 Sets Test Equipments |
Production Photos





Products Images






FAQ
Q: Do you accept customized orders?
A: Yes, you can tell us your requirements.
Q: Do you have stock?
A: Yes, Changxiang Mold Steel Supermarket, a wholly-owned subsidiary of Changxiang, has a stock of over 10,000 tons.
Q: Which countries and regions do you export to?
A: Germany, Turkey, Poland, Italy, Spain, Canada, USA, Brazil, and Japan, etc.
Q: Do you offer samples?
A: Yes, free samples can be provided.
Q: Are you factory or trader?
A: Yes, we're a factory. There are two steel-smelting plants, a steel-forging plant, a heat-treatment plant, two machining workshops, and a hydroelectric power plant.
Q: How can I get the price of needed product?
A: It's the best way if you can send us the material, size and surface, so we can produce for you to check the quality. If you have any confusion, feel free to contact us.
Q: Can we visit your company?
A: Yes, of course. Warmly welcome!