Audited Supplier
5059, 5083, 7039, 7020, 7017, 2519
Armoured Vehicles
ASTM, GB, EN
Stretching
5000 Series
T3 - T8
Mill Finish
Alloy
5059,5083, 7039, 7020,7017,2519
6-250 mm
1000-4300 mm
1000-12000 mm
T4, T6, T451, T651, T851
Signi aluminum
Wooden Pallet
China Standard
Henan China
76061190
Product Description
Defence aluminum plate/sheet (5059, 5083, 7039, 7020, 7017, 2519)
Classic alloy type: 5059,5083, 7039, 7017, 2519
Classic alloy type: 5059,5083, 7039, 7017, 2519
| Specifications | ||||
| Alloys (AA) | Temper | Thickness range (mm) | Length range (mm) | Width range (mm) |
| 5059,5083, 7039, 7020,7017,2519 | 5059:H131,H136, 5083:H131 7020,7017:T6 2519:T87 | 6 - 250 | 1000 - 10000 | 500 - 2700 |
| Stretched aluminum plate | |
| Thickness limit | 6 - 70 mm |
| Length limit | 2000 - 10000 mm |
| Chemical composition | ||||||
| Alloy (%) | 5083 | 2024 | 5754 | 5056 | 5052 | 7075 |
| Si | 0.40 | 0.50 | 0.40 | 0.30 | 0.25 | 0.40 |
| Fe | 0.40 | 0.50 | 0.40 | 0.40 | 0.40 | 0.50 |
| Cu | 0.10 | 3.8~4.9 | 0.10 | 0.10 | 0.10 | 1.2- 2.0 |
| Mn | 0.40- 1.0 | 0.30~0.9 | 0.50 | 0.05~0.20 | 0.10 | 0.30 |
| Mg | 4.0- 4.9 | 1.2~1.8 | 2.6- 3.6 | 4.5~5.5 | 2.2- 2.8 | 2.1- 2.9 |
| Cr | 0.05- 0.25 | 0.10 | 0.30 | 0.05~0.20 | 0.15- 0.35 | 0.18- 0.28 |
| Zr | - | - | - | - | - | - |
| Zn | 0.25 | 0.25 | 0.20 | 0.10 | 0.10 | 5.1- 6.1 |
| Ti | 0.15 | 0.15 | 0.15 | - | - | 0.20 |
| Each (Others) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Total (Others) | 0.10 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | Remaining | Remaining | Remaining | Remaining | Remaining | Remaining |
| Single number indicates maximum content. | ||||||
| Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
