Audited Supplier
DH48J-11
Time Relay
Lathe Relay, Counter
1
Ac
2
Weak Power Relay
Enclosed Relay
Electromagnetic Type
Subminiature
Electric Parameter Relay
zgpnkkj
Carton Packaging
53cm*34cm*33cm
Zhejiang Province
8536490000
Product Description
| Basicinformation | |||
| Model | DH48J Series | Stage | 1 |
| Power Type | Communication | Numberof poles | 2 |
| Principle of action | Electromagnetictype | Size | Miniature |
| Type | Electrical parameter relay | Voltage | AC/DC12VAC/DC24V,AC36V,AC110V,AC220V,AC380V |
| Power | 50Hz/60Hz | Makemethod | CycleDelay |
| TimeRange | 0 to 999900 | Contact capacity | AC220V3A(resistance) |
| Transport bag | Carton | Trademark | ZGPNKJ |
| Origin | Zhejiang | Production capacity | 10000 |
| Packaging and Delivery | |||
| Packing size | 53.00cm*34.00cm*33.00cm | ||
| Packing grossweight | 26.000kg | ||
Notifications 1. Since the relay has a time recording function, please preset the delay time before powering on, and the interval between restarting the relay is ≥ 5s. 2. Please set the dial to the time you want, connect the power supply, and then the LED screen starts timing from 0, when the preset time is reached, the delay contact is changed to stop timing to complete the timing control. 3. Reset function: Please connect Terminals 1 and 3 at any time, and the relay will return to the initial state. 4. Pause function: Please connect Terminals 1 and 4 at any time, then stop timing and keep the current time. When the terminal is disconnected, the relay will continue timing. 5. Please use a shielded lead wire. When the lead wire is connected to the reset terminal or connected to the pause terminal, it is too long in a high electric field environment. Do not put voltage or ground into the reset terminals (1,3), pause terminals (1,4). Failure to do so can damage the relay.
