Audited Supplier
In order to suit some specific applications, Firsta Group has also developed another PET liner with NON-silicone release coating.
PET Non-Silicone Release Film, coated without silicone to avoid the silicone residual pollution, is suitable for electronic material processing which is sensitive to silicone.A non-silicone release liner is a silicone free release liner. With a very smooth touch and a slight gloss, it can be used as a good release carrier in certain label applications, specialty tapes and die-cut.
Our expertise and strong innovation ability enable us to provide customers with the differentiated products.
| PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
| Thickness | ASTM D 374 | micron | 23 |
| Haze | ASTM D 1003 | % | 2.5 |
| Transmittance | ASTM D 1003 | % | 92 |
| Gloss (45°) | ASTM D 2457 | % | 85 / 90 |
| Heat Shrinkage (MD/TD) | BMS TT 0.2 (150ºC, 30min) | % | 1.5 / 0 |
| Tensile Strength (MD/TD) | ASTM D 882 | MPa | 230 / 240 |
| Release Force | TES 7475 TAPE (30cm/min,180°) | g/inch | 1~700 |
| Residual Rate | NITTO 31B TAPE | % | 90 |
Remarks: The above values of the properties obtained in our laboratory test.
These values are for informative purpose and not in guarantee or warranty in any specific conditions.
Applications
PET Non-Silicone Release Film is used in a variety of applications, including labels, specialty tapes, protective films.
PET non-silicone release liner can be widely used as a base layer during the die cutting process, and also as the protective film, cover film for electronic products in the final process.
It is popular in the electronics industry, where silicone is not allowed due to contamination concerns. Non-silicone release film is also considered more environmentally friendly than silicone based release liners.
Main Characteristics
* Wide range of release force (200~700 g/inch)
* High stability of release force
* Good residual rate
* High cleanliness and stiffness
* No silicone pollution, more environmentally
Company Profile
Reserch & Development
Certificates
Packaging & Shipping
All the products are packed with the wooden pallet to protect the goods reach to you in good conditions.
Almost all the shipping methods are okay for us to deliver the goods to you, such as sea shipment, air freight, train delivery...
Exhibition
FAQ
Q1. What information should I let you know if I need to get a quotation?
A. Material
B. Specifications (thickness, width, length)
C. Application (Used for labels / tapes / packaging)
D. Shipping terms
E. Order quantity and frequency
Q2. What is the MOQ (minimum order quantity)?
Generally, the MOQ is 1 ton or 10,000 square meters, depending on different products.
Q3. Is it okay to provide samples?
Yes, of course it's ok for us to provide samples for your testing.
If you need, please feel free to contact us at any time.
Q4. What about the lead time for mass production?
Generally, 15~30 days after receiving the advance payment, depending on different products and the production schedule.
