Audited Supplier
Typical Values
| PROPERTY | TEST METHOD | UNIT | TYPICAL VALUE |
| Thickness | ASTM D 374 | micron | 23 |
| Haze | ASTM D 1003 | % | 2.5 |
| Transmittance | ASTM D 1003 | % | 92 |
| Gloss (45°) | ASTM D 2457 | % | 85 / 90 |
| Heat Shrinkage (MD/TD) | BMS TT 0.2 (150ºC, 30min) | % | 1.5 / 0 |
| Tensile Strength (MD/TD) | ASTM D 882 | MPa | 230 / 240 |
| Release Force | 7475 TAPE (30cm/min,180°) | g/inch | 200~700 |
| Residual Rate | NITTO 31B TAPE | % | 90 |
Main Characteristics
* Wide range of release force (200~700 g/inch)
* High stability of release force
* Good residual rate
* High cleanliness and stiffness
* No silicone pollution, more environmentally
Uncompromising Performance with Non-Silicone Technology
Our PET release liner and release film are engineered with non-silicone technology, revolutionizing the adhesive industry. Designed to address the limitations of traditional silicone-based liners, our non-silicone PET liners offer unmatched performance in terms of release properties, durability, and compatibility.
Unlike silicone-based liners, our non-silicone PET release liners and films do not leave behind any residue or transfer unwanted substances to the adhesive. This ensures a clean and precise release, allowing for optimal adhesion and reducing the risk of contamination or adhesive failure. With our PET release liners, you can trust in consistent and reliable performance, ensuring your adhesive applications adhere flawlessly to their intended surfaces.
Superior Strength and Durability for Enhanced Efficiency
At Firsta Group, we understand the importance of durability and longevity in adhesive applications. Our PET release liners and films are engineered to withstand the most demanding environments, providing unparalleled strength and durability.
Thanks to the inherent properties of PET, our release liners offer excellent tear resistance, dimensional stability, and resistance to moisture and chemicals. This ensures that your liners remain intact throughout the entire production and application process, reducing waste and increasing overall efficiency. With our PET release liners, you can have peace of mind knowing that your adhesive applications are protected and supported by a robust and reliable liner.
Q1. What information should I let you know if I want to get a quotation?
A.Printing method
B.Size (thickness,width,length,release force,glue type)
C.Application
D.EXW, FOB or CIF(which port)
E.QTY
Q2. What is MOQ?
Generally, the minimum order is 1~10tons, depending on products.
Q3. Do you provide samples ?
Yes, we could offer the sample. If need, please contact us.
Q4.What about the lead time for mass production?
Generally, 15~30 days after received the deposit, depending on products.
