Audited Supplier
The P.C. Pump Gas Separator/gas anchor functions by forcing the fluids (which contain gases) to flow through it before reaching the pump. As the fluids first enter the Gas Separator they must flow through 8 intake ports which divide the flow and begin gas separation. The fluid then moves through the auger chamber, which subjects the fluid to centrifugal force. The principles of centrifugal force maintain that the more dense materials (eg. water and oil) will be forced to the outside of the chamber while the gas will remain close to the middle. As the fluids reach the top of the auger chamber liquid is removed via 6 outlet ports (around the perimeter of the top sub) which lead to the pump itself. As the separated gas reaches the top of the auger chamber it flows along a tapered end which guides it to an outlet port in the center of the top sub. This central outlet port then vents the gas into the annulus,where it may then migrate up the casing
1). The Gas Anchor must be installed in the string below the pump.
2). When the pump is landed in the well, the P.C. Anhcor should be above the perforations.
3). If it is desired or necessary for the fluid intake to be below the perforations, tubing may be
ran below the gas anchor (tail joints).
| AnchorType | LZX-113 | LZX-140 |
| Max OD mm | 113 | 140 |
| Max OD of cup mm | 132 | 165 |
| Connection thread type | 2 7 /8TBG | 2 7 /8TBG |
| Max length mm | 3200 | 3200 |
| Suitable casing size in | 5 1 /2'' | 7'' |
Dongying Zhaoxin Industry and Trade Co.,Ltd is an ISO-9001, ISO-14001, OHSAS-18001 certified company and has all the quality systems in place for design, planning,manufacturing and quality monitoring & traceability to ensure that Dongying Zhaoxin Industry and Trade Co.,Ltd products match the highest quality & reliability Standards similar to any International major in this field.
Dongying Zhaoxin Industry and Trade Co.,Ltd with perfect attitude, product and service, is going to make further development together with customers at home and abroad .
