Audited Supplier
DR series
Single
2 Years
1 - 50W
110-220V
Series Switching Power Supply
Self-excited Switching Power Supply
Width Modulation Type
Terminal Power Distribution Equipment
One-way Transmission
PWM
CE, RoHS, ISO, CCC
Leyu
1.25A
84%
47Hz~63Hz
15W
0.15kg
Leyu
Paper Packing
25*93*56mm(L*W*H)
China
8504401990
Product Description
High quality CE EMC approved ac to dc din rail power supply, 5v 12v 24v 48v 15w din rail power supply
15W Single Output Industrial DIN Rail Power Supply DR-15 seriesFeatures:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class 2
LED indicator for power on
100% full load burn-in test
2 year warranty
| SPECIFICATIONS | ||||
| OUTPUT | ||||
| Model | DR-15-5 | DR15-12 | DR-15-15 | DR-15-24 |
| DC Voltage | 5V | 12V | 15V | 24V |
| Rated Current | 2.4A | 1.25A | 1A | 0.63A |
| Current Range | 0-2.4A | 0-1.25A | 0-1A | 0-0.63A |
| Rated Power | 12W | 15W | 15W | 15.2W |
| Ripple & Noise | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p |
| Voltage Adj. Range | -5%,+10% | ±10% | ±10% | ±10% |
| Voltage Tolerance | ±2% | ±1% | ±1% | ±1% |
| Setup, Rise, Hold Up Time | 1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load70ms/230VAC16ms/115VAC at full load | |||
| INPUT | ||||
| Voltage Range | 85 ~ 264VAC 120 ~ 370VDC | |||
| AC Current | 0.88A/115VAC 0.48A/230VAC | |||
| Efficiency | 77% | 84% | 83.50% | 85% |
| Inrush Current | COLD START 35A/115VAC 65A/230VAC | |||
| PROTECTION | ||||
| Over Load | 105%~160% | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | ||||
| Over Voltage | 115%~135% | |||
| Protection type: Shut down o/p voltage, re-power on to recover | ||||
| ENVIRONMENT | ||||
| Working Temp., Humidity | -10ºC~+60ºC; 20%~90%RH | |||
| Storage Temp., Humidity | -40ºC~+85ºC; 10%~95%RH | |||
| Temp. Coefficient | ±0.03%/ºC(0~50ºC) | |||
| Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | |||
| SAFETY | ||||
| Withstand Voltage | I/P-O/P: 3KVAC | |||
| Isolation Resistance | I/P-O/P: 100M Ohms / 500VDC | |||
| STANDARD | ||||
| Safety Standard | Design refer to UL60950-1,TUV EN60950-1,EN50178 | |||
| EMC Standard | Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3 | |||
| OTHERS | ||||
| Dimension | 25*93*56mm(L*W*H) | |||
| Weight | 0.15Kg | |||
| Packing | 140pcs/carton | |||
| NOTE | ||||
| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||||
