Emerson/Vertiv R48-2000e3 Rectifier Module

Vertiv/Emerson R48-2000e3 RECTIFIER MODULE
 
Product description:
 
The 2000 watt high-efficiency eSure rectifier (model R48-2000e3) converts standard
AC supply voltages into stable nominal -48 VDC voltage that is adjustable to application
needs. This constant power rectifier designed with the latest patented switch-mode
technology, uses DSP (Digital Signal Processing) for efficient operation.
The R48-2000e3 can be connected in parallel with other rectifiers and converters to
support a variety of telecom applications. Unified remote management and control of the
power system is enabled when combined with a Vertiv™ controller.
 
Product features:
 
1.Optimize the amount of energy delivered and reduce power consumption with over 96% efficiency.
2.Increase space for revenue generating equipment with modules that pack more power in a small space with high power density.
3.Facilitate easy maintenance, expansion and system changes with hot swappable capabilities.
4.Enjoy increased reliability and active load sharing with Digital Signal Processing (DSP) which translates into fewer components and
optimized operation.
5.Appreciate the flexibility to utilize in a variety of applications with a wide input voltage range of 85 VAC to 300 VAC and full power output at temperatures from -40˚C to +65˚C.

Specifications
R48-2000E3
AC InputVoltage :85 VAC to 300 VAC (see figure 1),
                           187 VAC to 264 VAC (nominal)
Frequency 45 Hz to 65 Hz
Maximum Current 12 A
Power Factor >0.99 from 50 to 100% load
Protection
High and low voltage protection, surge and lightning protection
Adapts to poor quality grid (voltage dip, weak mains)
Disconnection at 415 VAC
Mains fuses in both lines
DC Output Voltage -42 VDC to -58 VDC
Maximum Power 2000 W
Maximum Current 42 A @ -48 VDC, limit set point 0 to 42 A (see figure 2)
Peak Efficiency 96.2%
Protection
Fuse for reverse connection and back feeding protection
High voltage shutdown
High temperature protection
Control and Monitoring
Converter Alarm and Signaling Alarm and status reported via CAN bus to system controller
Visual Indications
Green LED: Normal Operation
Yellow LED: Alarm
Red LED: Failure
Environmental
Operating -40°C to 80°C / -40°F to +176°F (see figure 3 for derating)
Temperature Derating
Full output power up to +65°C at input voltage range 200 to 250 VAC
(see figure 3)
Storage -40°C to +70°C / -40°F to +158°F
Relative Humidity 0 to 95%
Altitude Full output power up to +65°C at input voltage range @200~ 250 VAC
Standards Compliance
Safety 60950-1 (EN, IEC and UL)
EMC
EN55022, CISPR22, ETSI EN300 286: 2005, FCC CFR 47 Part 15,
Telcordia GR-1089-CORE issue 6 (Class B conducted and radiated)
Environment REACH, RoHS, WEEE
Mechanics
Dimensions: (H x W x D) 41 x 84.5 x 252.5 (mm) / 1.61 x 3.33 x 9.94 (inches)
Weight :1.13 kg / 2.49 lbs


 

Hotsale Modules