Audited Supplier
SZ Series Gearbox For Double Screw Extruder (
Machinery, Agricultural Machinery, Rubber and Plastic Extrusion
Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Helical
Hardened Tooth Surface
Horizontal Type
Four-Step
Bevel Gear
Spur Gear
Rolling Gear
High Strength Alloy Steel
Yes
ISO9001-2008, SGS
12 Months
JC, Duoling
Wooden Case
200-800
China
8483409000
Product Description
Duoling Brand SZ Series Gearbox For Double Screw Extruder (Transmission Case)
Company Profile
Established in 1979, Jiangyin Gearbox Manufacturing Co., Ltd. is located in National High-tech Development Zone of Jiangyin, Jiangsu, China. With more than 38 years' experience in research and development of gear transmission products, the factory covers an area of 87,000 square meters. ISO9001certified in 1999, we have high qualified R&D engineer team and manufacturing talents as well as first-class processing and testing equipments.
Product description
The transmission gear of SZ Cone Double Screw Extruder is a mechanical transmission gear specially designed as a mating device for the cone double screw plastic extruder. The device can transmit the power generated by the major motor to the long axis of the distributor case after speed reduction and twist increasing in the transmission case. Then the long axis drives the minor axis through a pair of small-cone-angle spiral gear with a transmission ratio of 1: 1. The long axis and the minor axis with the same corner dimension as the screw bolt and in the manner of inverted outward rotation drive the screw bolt to extrude high-quality products.
The transmission case is designed according to the standard of JB / T9050.1_1999. The gears and axial parts are made of high strength alloy steel. The gear goes through the process of carburization, heat hardening and gear grinding, with the gear precision of grade 5 and the tooth surface hardness of HRC54-62. The distributor case is made of ductile iron. The gear is made of 38CrMoAL which has gone through the nitrogen treatment. The gear hobbing is cut with numerical control hobbing machine, thus its cone angle precision is much higher than other processing method. All the oil seal adopts imported products. Both the transmission case and the distributor case are equipped with cooling coils, which are used to cool the lubricating oil.
Due to the new improvements in gear precision and bearing configuration compared with the traditional products, its overall performance is superior to that of the current products.
FAQ
Are you trading company or manufacturer?
A: We are manufacturer with over 38 years' experience.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q: How long should I wait for the feedback after I send the enquiry?
A: Normally within 12 hours.
Q: What information should I give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions & Order quantity etc.
Q: Hong long is your product warranty?
A: We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
T/T 100% in advance for amount less than USD10000.-, 30% T/T in advance , balance before shipment for amount above USD10000.-
Company Profile
Established in 1979, Jiangyin Gearbox Manufacturing Co., Ltd. is located in National High-tech Development Zone of Jiangyin, Jiangsu, China. With more than 38 years' experience in research and development of gear transmission products, the factory covers an area of 87,000 square meters. ISO9001certified in 1999, we have high qualified R&D engineer team and manufacturing talents as well as first-class processing and testing equipments.
Product description
The transmission gear of SZ Cone Double Screw Extruder is a mechanical transmission gear specially designed as a mating device for the cone double screw plastic extruder. The device can transmit the power generated by the major motor to the long axis of the distributor case after speed reduction and twist increasing in the transmission case. Then the long axis drives the minor axis through a pair of small-cone-angle spiral gear with a transmission ratio of 1: 1. The long axis and the minor axis with the same corner dimension as the screw bolt and in the manner of inverted outward rotation drive the screw bolt to extrude high-quality products.
The transmission case is designed according to the standard of JB / T9050.1_1999. The gears and axial parts are made of high strength alloy steel. The gear goes through the process of carburization, heat hardening and gear grinding, with the gear precision of grade 5 and the tooth surface hardness of HRC54-62. The distributor case is made of ductile iron. The gear is made of 38CrMoAL which has gone through the nitrogen treatment. The gear hobbing is cut with numerical control hobbing machine, thus its cone angle precision is much higher than other processing method. All the oil seal adopts imported products. Both the transmission case and the distributor case are equipped with cooling coils, which are used to cool the lubricating oil.
Due to the new improvements in gear precision and bearing configuration compared with the traditional products, its overall performance is superior to that of the current products.
| Type | SZ35 | SZ45 | SZ50 | SZ55 | SZ65 | SZ80 | SZ92 |
| Input Rotary Speed max r/min | 1500/975 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Output Rotary Speed max r/min | 47 | 45 | 38 | 38 | 39 | 39 | 40 |
| Input Power KW | 11 7.5 | 18.5 | 22 | 30 | 37 | 55 | 110 |
| Single Axis Output Torque N. m | 1180/723 | 1972 | 2779 | 3820 | 4518 | 6786 | 13130 |
FAQ
Are you trading company or manufacturer?
A: We are manufacturer with over 38 years' experience.
Q: How long is your delivery time?
A: Generally it is within 10 days if the goods are in stock, for goods produced as per order, it is within 35 days after confirmation of order.
Q: How long should I wait for the feedback after I send the enquiry?
A: Normally within 12 hours.
Q: What information should I give you to confirm the product?
A: Model/Size, Transmission Ratio, Speed, Shaft directions & Order quantity etc.
Q: Hong long is your product warranty?
A: We offer 12 months warranty from departure date of the goods.
Q: What is your payment terms?
T/T 100% in advance for amount less than USD10000.-, 30% T/T in advance , balance before shipment for amount above USD10000.-
