Audited Supplier
SQ-700-X
All Filter Fabric
Filter Material
Non-Woven Polyester Fiber
The Filter Type
Mesh Filter Bag
Dust Filter
All
Round Bag
Temperature
No
6-10m (Adjusted by Different Fabric)
3
120-200mm
5-13m/Min(Adjustable)
0.6-0.8MPa
SHANQIU
Wooden Case
China
Product Description
Automatic Tubing production line
(Sewing & Hot Air, Welding) SQ-700-X
Description:
In addition to having the characteristics of the original sewing production line,also add the function of the hot melt,sewing machine head and hot melt head in one production line, only need to operate control panel ,make the replacement of the production process more convenient and fast.
Component:
Main features:
1. High production efficiency, the highest speed can reach 10 meters per minute.
2. Failure rate is low. This machine adopted the advanced transmission structure both at domestic and abroad, also added needle lifting feeding function, to make the needle hole smaller. Needle will not be deformation, and there's less failure rate.
3. It can save more oil, oil seal is good. There is enough oil during working, so it will not lead to the components' service life to be shorter because of lack of oil.
4. Main motor of sewing machine adopts energy-saving servo motor, so the speed of the sewing machine can be adjusted arbitrary among the range of 50-3600r.p.m/min as working required. LED display screen can display the speed of the sewing machine in the work.
Main Functions:
1. Feeding function: Automatic feeding.
2. Feeding detection function: There's a sensor in feeding rack, if there's no fabric, the machine will automatic stop working to protect the machine.
3. Floating roller in rack: Add the floating roller in feeding rack, provide the tension to fabric, has solved the problem of uniform stitch caused by lack of tension in the fabric. (Patent)
4. Automatic Rubbing the membrane fabrics: There's a rubbing device installed in the material rack. It can rub the edge of membrane fabrics, so that the fabric can be welding while across the hot melt head.
5. Backing and returning of material: When the line the broken, the fabric can return slowly by pressing the control button on touch screen, to prevent the needle from being bent, reduce the waste fabric, protect the machine, extend service life.(Patent)
6. Hidden type threading lighting: There's a light hidden in thread part, make it easier to threading.
7. Breaking stop function: There are six sensors installed on the sewing head, the machine will automatic stop when the thread is broken.
8. Computer adjustable needle gauge function: The distance of the stitch can be adjusted by touch screen.
9. Multifunctional adjustable edge device: The normal range of the edge device can be 120-200mm.
10. Needle lift feeding function: The fabric will only feed while the needle has lift. It can prevent the needle from being bent ,extend service life and make the needle hole much smaller, easily meet the waste gas emission standard.( Patent)
11. Machine needle cooling function: There's a tube beside the needle, below the air to cool the needle, reduce the temperature of needle, protect the needle, reduce the loss of the needle.
12. Automatic fixed length cutting function: The length of the bag can be adjusted by the sensors of conveyor, and automatic cut.
13. Sharpening function: Start sharpening function by touch screen, the cutter will automatic running, use grindstone to close the cutter to sharp.
14. One-click switching heads function: We only need to click the button on the touch screen to change the machine head and process. Hot melt table is hidden while using sewing head. Click the hot melt function, the table will automatic rise up.
15. Hot melt speed and temperature adjustable: By PLC system touch screen adjust speed and temperature,the rang of hot melt speed is 5-13m/min,the rang of temperature is 50-700ºC.
Control System:
1. The precision of the cutting system is to be ensured between 2 mm, this device adopts two import photoelectric sensors, to ensure the reliability of accuracy.
2. 5.5 inch LCD of color operation control, embedded operation buttons, beautiful, convenient and fast. There have high definition surveillance cameras and large size display to ensure the high quality of sewing production process when work.
3. Feeding system adopts the advanced tilting working structure, this design greatly saves the land area of the workshop for users, and utilizes every inch of space of the workshop effectively.
Specifications:
(Sewing & Hot Air, Welding) SQ-700-X
Description:
In addition to having the characteristics of the original sewing production line,also add the function of the hot melt,sewing machine head and hot melt head in one production line, only need to operate control panel ,make the replacement of the production process more convenient and fast.
Component:
Main features:
1. High production efficiency, the highest speed can reach 10 meters per minute.
2. Failure rate is low. This machine adopted the advanced transmission structure both at domestic and abroad, also added needle lifting feeding function, to make the needle hole smaller. Needle will not be deformation, and there's less failure rate.
3. It can save more oil, oil seal is good. There is enough oil during working, so it will not lead to the components' service life to be shorter because of lack of oil.
4. Main motor of sewing machine adopts energy-saving servo motor, so the speed of the sewing machine can be adjusted arbitrary among the range of 50-3600r.p.m/min as working required. LED display screen can display the speed of the sewing machine in the work.
Main Functions:
1. Feeding function: Automatic feeding.
2. Feeding detection function: There's a sensor in feeding rack, if there's no fabric, the machine will automatic stop working to protect the machine.
3. Floating roller in rack: Add the floating roller in feeding rack, provide the tension to fabric, has solved the problem of uniform stitch caused by lack of tension in the fabric. (Patent)
4. Automatic Rubbing the membrane fabrics: There's a rubbing device installed in the material rack. It can rub the edge of membrane fabrics, so that the fabric can be welding while across the hot melt head.
5. Backing and returning of material: When the line the broken, the fabric can return slowly by pressing the control button on touch screen, to prevent the needle from being bent, reduce the waste fabric, protect the machine, extend service life.(Patent)
6. Hidden type threading lighting: There's a light hidden in thread part, make it easier to threading.
7. Breaking stop function: There are six sensors installed on the sewing head, the machine will automatic stop when the thread is broken.
8. Computer adjustable needle gauge function: The distance of the stitch can be adjusted by touch screen.
9. Multifunctional adjustable edge device: The normal range of the edge device can be 120-200mm.
10. Needle lift feeding function: The fabric will only feed while the needle has lift. It can prevent the needle from being bent ,extend service life and make the needle hole much smaller, easily meet the waste gas emission standard.( Patent)
11. Machine needle cooling function: There's a tube beside the needle, below the air to cool the needle, reduce the temperature of needle, protect the needle, reduce the loss of the needle.
12. Automatic fixed length cutting function: The length of the bag can be adjusted by the sensors of conveyor, and automatic cut.
13. Sharpening function: Start sharpening function by touch screen, the cutter will automatic running, use grindstone to close the cutter to sharp.
14. One-click switching heads function: We only need to click the button on the touch screen to change the machine head and process. Hot melt table is hidden while using sewing head. Click the hot melt function, the table will automatic rise up.
15. Hot melt speed and temperature adjustable: By PLC system touch screen adjust speed and temperature,the rang of hot melt speed is 5-13m/min,the rang of temperature is 50-700ºC.
Control System:
1. The precision of the cutting system is to be ensured between 2 mm, this device adopts two import photoelectric sensors, to ensure the reliability of accuracy.
2. 5.5 inch LCD of color operation control, embedded operation buttons, beautiful, convenient and fast. There have high definition surveillance cameras and large size display to ensure the high quality of sewing production process when work.
3. Feeding system adopts the advanced tilting working structure, this design greatly saves the land area of the workshop for users, and utilizes every inch of space of the workshop effectively.
Specifications:
| Sewing part | |
| Sewing speed | 6-10m (Adjusted by different fabric) |
| Stitch range | 3-7mm (Adjustable) |
| Presser foot lift height | 18mm |
| Needle bar stroke | 33.6mm |
| Needle gauge | 3.2/3.2mm (Customized) |
| Bag diameter | Flat connection: 120-200mm (Adjustable) S type connection: 120-200mm (Adjustable) |
| Needle type | UY128 (19-23) |
| Lubrication | Individual oiling by hand |
| Pin number | 3 |
| Conveyor length | 6m (Customized) |
| Hot melt part | |
| Joint width | 15-17mm (Customized) |
| Material | Normal polyester,PPS,Polyester,Polyurethane etc. |
| Hot melt bag diameter | 120-200mm |
| Hot melt speed | 5-13m/min(Adjustable) |
| Wind temperature | 50-700ºC(Adjustable digital display) |
| Air pressure | 0.6-0.8MPa |
| Total power | 4.32KW (Can be changed as required.) |
