Audited Supplier
40*40
Long Time Materials
Block
2%-4%
9-12%
Less Than 1.5%
More Than 85%
Refractoriness> 2000
Refractory Material
Carbon
SINCERCARBON
Jumbo Ba
China
38013000
Product Description
Electrode paste is a conductive material used for self baking electrodes in various types of ferroalloys, calcium carbide, and other ore furnaces. Due to different design parameters of the submerged arc furnace, different electrode quality parameters are required. The electrode paste used for self baking electrodes is mainly produced from high-quality Taixi anthracite, residual anode, artificial graphite, petroleum coke, and other raw materials. The electrode paste product is prepared by blending, kneading, and shaping. With the rapid development of mining heat furnace technology, electrodes, as the heart of normal operation of mining heat furnaces, require increasingly strict quality requirements for electrode paste. Our company is closely following the development of ore heating furnace technology and constantly committed to the research of electrode paste formula, process, and technology. Our products are not limited to meeting national industry standards, but also focus on precise customization of electrode paste that meets the quality requirements of each furnace according to different furnace types. As early as 2014, the company successfully developed an electrode paste with a diameter of 1.9 meters that matched the self baking electrode required for the world's largest 63000KVA large silicon iron ore hot furnace. It has been running smoothly since use, and the production and smelting are in the best state.
| Carbon Electrode Paste is produced by putting petroleum coke and asphalt into melting tank to dehydration, melt, then adding them into kneading pot to kneading, molding and sintering. | |||||
| Specification | Ash % (max) | V.M. % (max) | Restivity μΩm (max) | Compressive strength Mpa % (min) | Volume density % (min) |
| Airtight Electrode Paste | 4.0-6.0 | 12.00-15.50 | 65-75 | 17-18 | 1.37g/cm3 |
| Standard Electrode Paste | 7.0-11.0 | 9.50-15.50 | 80-90 | 20-22 | 1.37g/cm3 |
| Chemical Electrode Paste | 11 | 11.0-15.5 | 90 | 18 | 1.37g/cm3 |
