Audited Supplier
measurement
Wrap a soft ruler around the plate, measuring the widest point in an arc
There is no ruler that you can mark with paper around your nails and then measure on the ruler
| model | thumb | index finger | middle finger | ring finger | little finger |
| XS | 14mm | 10mm | 11mm | 10mm | 7mm |
| S | 15mm | 11mm | 12mm | 11mm | 8mm |
| M | 16mm | 12mm | 13mm | 12mm | 9mm |
| L | 17mm | 13mm | 14mm | 13mm | 10mm |
1.Polish the nail plate with a rubbing strip
2.Clean nail plate with alcohol cotton
3.Choose the right double-sided jelly glue
4.Peel off the film 45 ° C from the root paste
5.Press for about 40 seconds
6.Pull it off
1.Polish the nail plate with a rubbing strip
2.Clean nail plate with alcohol cotton
3.Cut the glue to the appropriate size
4.Put a drop of glue on the nail plate
5.Push quickly from the root of the finger to the tip of the finger
6.Press for about 30 seconds,pull it off
Gently peel off the sides with a wooden stick Clean the jelly glue on the nail plate for next time
1.Prepare the gel remover
2.Apply a small amount of gel remover to the inside of the nail plate
3. Wait a few moments and slowly pry the stick away from the edge
4.Drop a small amount of gel remover again from the pry open edge
5.Repeat with the stick slowly pry open low intensity and high frequency
6.Slowly peel off the nail Uninstall is complete
caution:
Different light/Angle/display difference/resolution may cause a certain color difference, manual measurement each other may have a small error, are normal phenomena.
Scalloped nails/flat nails/nails are too arched and cannot be fully fitted when worn
The pattern jewelry will change randomly according to the size of the nail, without affecting the overall atmosphere
Whether the nail paste is firm depends on the correct operation steps and personal techniques
Manual is different from machine, small defects (including but not limited to subtle lack of color imbalance/jewelry placement) do not affect the wear is not a quality problem
Please confirm the delivery time first, can wait to shoot.
Q1: Can I print our logo on the products and change the color of the products?
A: Yes, we accept OEM service.
Q2: Can I get a sample?
A: Of course, but you may need to pay a sample charge which will be returned after any order is signed.
Q3: What is the sample lead time & production lead time?
A: The stock sample is 1-3 days, making the sample 7-15 workdays after receiving your sample charge.
Depending on your order quantity, the production lead time is about 7-30 days.
Q4: What are your payment terms?
A: We can accept TT and Paypal.
Q5: What are your terms of delivery?
A: FedEx/DHL/UPS/TNT/EMS for sample.
By air/sea/train for batch goods, Airport/port /station receiving.
Customers specifying freight forwarders or negotiable shipping methods.
