Audited Supplier
air blown fiber
Communication
Single-mode Fiber
SC
Round Wire
100(N/100mm)
100N<1000N
Multicore
RoHS, CE, ISO9001, VDE, CCC
OEM
Low Friction Sheath
G652D, G657A1, G657A2
Low Friction Sheath
Yellow
2-6km/Drum
Takfly
Drum
2-12 fibers
Shenzhen, China
8544700000
Product Description
Enhanced Performance EPSU Multimode Singlemode HDPE Air blown Fibre Cable
Description:
Air blown optical fibre is a very small diameter cable for air blown installation in to micro duct The fibers are coated with a soft resin layer as a cushion to provide protection to the fiber A patented outer jacket with groove design give s low friction and best blowing performance to the installation.
Air blown optical fibre is typically used in micro duct installation applications. ABF can utilize in existing and new duct systems more effectively by accommodating more fibres in given subduct network. The fiber units is suitable for air-blown installation. Cable parameters such as cable diameter, stiffness and sheath friction is optimized for best installation performance.
The expected service life in normal use exceeds 30 years.
Feature:
>> Fiber amount: 2,4,6,8 and 12 fibers
>> Fiber type: G.G652D, G.657A1 and G.657A2
>> Small diameter, stable structure, good mechanical and temperature performance
>> Designed with special grooves to advance blowing distance..
>> Frees up capital to expand network and client base
>> Network design flexibility
>> Designed with no gel, easy stripping and handling.
>> Complete accessories, less manpower, lower installation time.
Standards:
>> Unless otherwise specified in this specification, all requirements shall be mainly in accordance with the following standard specifications.
>> Optical fiber: ITU-T G.651,G.652,G.655,G.657 IEC 60793-2-10,IEC 60793-2-50
>> Optical Cable: IEC 60794-1-2,IEC 60794-5
Specification:
Fibre Count | 2 Fibres | 4 Fibres | 6 Fibres | 8 Fibres | 12 Fibres |
Outer Diameter (mm) | 1.15±0.05 | 1.15±0.05 | 1.40±0.05 | 1.60±0.05 | 1.80±0.05 |
Min Bend radius (mm) | 50 | 50 | 60 | 80 | 80 |
Temperature | Storage: -30ºC ~ +70ºC Operation: -30ºC ~ +70ºC Installation: -5ºC ~ +50ºC | ||||
Cable service life (estimate value) | 25 years | ||||
Note: It is recommended that the structure of 2 fibres unit consist of 2 filled fibres, for it is proved that 2 fibres unit with 2 filled fibres is better than the one with zero or one filled fibre in the blowing performance and the fibre stripping-ability. | |||||
Fibre Count | 2 Fibres | 4 Fibres | 6 Fibres | 8 Fibres | 12 Fibres |
Test equipment | PLUMETTAZ:UM25, ERICSSON:F, CATWAY:FBT-1.1 | ||||
Standard duct | 5.0/3.5 mm | ||||
Pressure | 7bar / 10bar | ||||
Typical blowing distance | 500m / 1000 m | 500m / 1000m | 500m / 1000m | 500m / 1000m | 500m / 800m |
Typical blowing time | 10 min/18 min | 10 min18 min | 12 min/ 18 min | 13min/18 min | 15 min /20 min |
Test | Standard | Parameters | Test Results |
Tension | EN 18700 A1/501 IEC 60794-1-2-E1 | Load is 1×W | Additional attenuation ≤0.05dB after test |
Bend | IEC 60794-1-2--E11A | Diam 40mm×3turns 5 cycles at 20ºC | Additional attenuation ≤0.05dB,after test |
Crush | IEC 60794-1-2-E3 | 100 N, 60s | Additional attenuation ≤0.05dB,after test |
All optical testing proceeded at 1550 nm | |||
Pan packing information:
Standard delivery lengths are: 1000m, 2000m, 4000m, with a tolerance of 0~+5%.
Fibre Count | Length(m) | Pan Size Φ×H(mm) | Weight (Gross) (kg) |
2~4 Fibres | 2000 m | φ510 × 200 | 8.0 |
4000 m | φ510 × 200 | 10.0 | |
6000m | φ510 × 300 | 13.0 | |
6 Fibres | 2000 m | φ510 × 200 | 9.0 |
4000 m | φ510 × 300 | 12.0 | |
8 Fibres | 2000 m | φ510 × 200 | 9.0 |
4000 m | φ510 × 300 | 14.0 | |
12 Fibres | 1000 m | φ510 × 200 | 8.0 |
2000 m | φ510 × 200 | 10.0 | |
3000m | φ510 × 300 | 14.0 | |
4000 m | φ510 × 300 | 15.0 |
Optical fiber color:
Options of Micro Air Blown Fiber Optic Cable:
Air blown optical cable installation:
