Audited Supplier
CT-06
Iron Red, Gray
Alkyd
Alkyd Antirust Primer
One-Component,Stir Well with Mechanical Stirring
523%
Brush
1.50.1g/Ml
Single Item
Surface-Treated Steel Substrates
Pl
6.5X6.5X19.Cm
40um
77um
Liquid Coating
20.000 Kg
0.115kg/M2/40um
5h
Jinglin
Jiangsuchina
Product Description
Color | Iron red, gray |
Mixing ratio (weight) | One-component,Stir well with mechanical stirring |
Specific gravity (after mixing) | 1.5±0.1g/ml |
Bulk solids | 52±3% |
Typical dry film thickness | 40um |
Typical wet film thickness | 77um |
Theoretical coating rate | 0.115kg/m²/40um |
Surface stem | ≤5h |
Practical | ≤24h |
Fully cured | 7d |
Mixed use period | There is no activation period limit for single components |
Diluent | Special thinner for PT |
Application | |
Applicable substrates | Surface-treated steel substrates |
Front-end coating | - |
Back-end coating | Alkyd topcoat |
Product Introduction
It is composed of alkyd resin, modified resin, anti-rust pigment, coloring pigment, physique pigment, drier, additives and
solvents. It can be used with alkyd, phenolic and other topcoats, and has good anti-rust performance.
Product Use:
It is suitable for anti-rust paint for onshore steel structures, steel machinery and equipment, etc., and can be used with
traditional topcoats such as phenolic and alkyd.
It is composed of alkyd resin, modified resin, anti-rust pigment, coloring pigment, physique pigment, drier, additives and
solvents. It can be used with alkyd, phenolic and other topcoats, and has good anti-rust performance.
Product Use:
It is suitable for anti-rust paint for onshore steel structures, steel machinery and equipment, etc., and can be used with
traditional topcoats such as phenolic and alkyd.
Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.
Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.
Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.
Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.
Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.
Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.
Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.
