Audited Supplier
tafa 45CT
Aviation, Electronics, Industrial, Medical, Chemical
JIS, GB, DIN, BS, ASTM, AISI
Ni50
Alloy
Nickel Alloy wire
Not Powder
HRC 30-35
7000 psi
10 lbs/hr/100A
85%
Boiler Tubes/Corrosion Resistance
Avaiable
ISO9001:2009
Small Order Accepted
15-20 days
Bright
TANKII
in Spool/ Carton / Wooden Case
1.6mm, 2.0mm, 3.175mm
Shanghai, China
7505220000
Product Description
Equal to Tafa 45CT NiCrTi Thermal Spray Wire Packed in DIN300 Spool
Product Overview:
NiCrTi/45CT thermal spray wire is a Nickel/Chrome/Titanium wire developed specifically for boiler applications. This second generation material replaces 06BXP and produces coatings which are extremely resistant to corrosive vanadium and sulfur gases in boiler atmospheres.
Typical Uses and Applications of tafa 45CT thermal spray wire:
This material has proven very effective in providing long term protection to boiler tubes against high temperature sulfidation. The wrought material is highly resistant to sulfur/vanadium atmospheres up to 1800°F. Wrought material of this type has shown a 2 mil per year corrosion rate over a nine year period when used in the super heater section of boilers. Coatings of 45CT wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service (as of this writing).
Product Overview:
NiCrTi/45CT thermal spray wire is a Nickel/Chrome/Titanium wire developed specifically for boiler applications. This second generation material replaces 06BXP and produces coatings which are extremely resistant to corrosive vanadium and sulfur gases in boiler atmospheres.
Typical Uses and Applications of tafa 45CT thermal spray wire:
This material has proven very effective in providing long term protection to boiler tubes against high temperature sulfidation. The wrought material is highly resistant to sulfur/vanadium atmospheres up to 1800°F. Wrought material of this type has shown a 2 mil per year corrosion rate over a nine year period when used in the super heater section of boilers. Coatings of 45CT wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service (as of this writing).
