Audited Supplier
Model Para. | ExS6061NS-10DF/24V | ExS6061NS-10DF/230V | ExS6061NS-20DF/24V | ExS6061NS-20DF/230V | ExS6061NS-30DF/24V | ExS6061NS-30DF/230V | |
Torque | 10Nm | 20Nm | 30Nm | ||||
Damper Size | 1m2 | 3m2 | 4.5m2 | ||||
Power Supply | AC220V AC24V DC24V 50/60Hz i ≤0.2A AC220V 50/60Hz | ||||||
Consumption | 7W run/3W remain | 10W run/3W remain | 12W run/3W remain | ||||
Wire Size | 10VA | ||||||
Connection cable | Power:1m cable 4*0.5 m2 | ||||||
Auxiliary Switch (F): 1m cable 6*0.5 m2 | |||||||
Running Time | Motor≤150s | ||||||
Angle of Rotation | Max 93º | ||||||
Position Indication | Mechanical indicator | ||||||
Weight | 5Kg | ||||||
Life Cycle | ≥10000 cycles | ||||||
Sound Level | 50dB(A) | ||||||
IP Protection | IP66 | ||||||
Ambient Temperature | -20~+60ºC | ||||||
Ambient Humidity | 5~95%RH | ||||||
Explosion-proof Mark | Ex db B T6 Gb Ex tb IIIC T85°C Db | ||||||
ExS6061NS-10/20/30DF/24(230)V
Features of ExS6061NS-10/20/30 Explosion-proof Actuator
Single control
Form-fit 12x12cm shaft
Universal shift plug
Two auxiliary switches
Cast aluminum housing, compacting type
Safety meets IP66
Meet the following standard of ExS6061NS-10/20/30 Explosion-proof Actuator
IEC60079-0:2017, EN60079-0:2012+A11:2013
Electrical Apparatus for Explosive Gas Atmospheres,General Requirements
IEC60079-1:2014, EN60079-1:2007
Electrical Apparatus for Explosive Gas Atmospheres,Explosion-proof
Type:flame-proof
IEC60079-31:2013,EN60079-31:201
Equipment dust ignition protection by enclosure "t"
Usage and Maintenance of ExS6061NS-10/20/30 Explosion-proof Actuator
The matching thread size of the cable joint and shell is M16 × 1.5, and the diameter of the cable is Φ 6 - Φ 8. The cable joint shall have an Explosion-proof certificate.
The tightening torque of the ground terminal is 2N. m, Tightening torque of Flameproof joint is 3.2N.m., External ground bolt M4X6, compressing 4mm² conductors.
It is strictly prohibited to disassemble or open the cover without permission, and do not open the cover with electricity; please do not open it in dangerous occasions; wipe it with wet cloth when opening it.
The interface shall be equipped with an explosion-proof certified cable gland and have compatible protection mode.
In addition to the use of the installation manual, during assemble, operation and maintenance, the operator shall comply with the requirements of EN 60079-14
The maintenance and repair shall meet the requirements of EN 60079-19.
Electrical connection and out line:
