Audited Supplier
Vehicle Parameters
| Overall Dimensions(L*W*H)(mm) | 9100×2550×3800 | ||
Total Mass(kg) | 18000 | Curb Weight(kg) | 8805 | |
Bulletin loading(kg) | 8870 | Fuel consumption (l/100km) | 24.1 | |
Max speed(km/h) | 89 | Minimum turning radius(m) | 9 | |
Chassis Parameters
| Chassis Model/ Manufacturer | CA1180P62K1L4E6 /FAW Trucks Company | ||
Engine model / manufacturer | CA4DK1-24E6 /FAW Engine Co., Ltd | |||
Transmission model / manufacturer | 8JS85E/Shaanxi Fast Gear Co.,ltd | |||
Drive Mode: | 4×2 rear wheel drive | wheelbase(mm): | 5100 | |
Engine capacity(ml) | 5700 | Maximum torque (n.m)/(r/min) | 700/1500 | |
Rated power and rated speed(kw)/(r/min) | 132/2500 | Tire specifications | 10.00R20 18PR | |
Standard Configuration | The tank is designed with a fully enclosed structural frame, made of all-aluminum alloy profiles, with light weight, high strength and strong rust resistance. | |||
Standard Configuration
| The roof is equipped with an advanced umbrella top design that can be lifted up and down to facilitate temperature control during top loading, unloading, cleaning and disinfection. | |||
The professional equipment imported from Dutch technology, adopts the tail lifting loading and unloading method, the internal double channel, can be turned up, easy to handle, clean and disinfect | ||||
Sliding windows are designed on both sides of the vehicle body for emergency use in high temperature and extreme weather. | ||||
Video surveillance and temperature monitoring in the tank | ||||
Area(m2) | 42 | |||
Number of compartments | 9 | |||
Voltage(V) | 24 | Spray tank volume(L) | 350 | |
Layer height per floor (mm) | 815/815/865 | |||
Number of front fans(pc)/Air volume(m3/h)/pc | 6/2730 | |||
Number of rear fans(pc)/Air volume(m3/h)/pc | 6/1300 | |||
High Configuration
| Flanged without partition MERV 15 filter system | Prevent infection of bacteria during transport of pigs | ||
Water system or spray system can be installed on each floor | ||||
Insulation partitions are installed on both sides and top of the tank to effectively avoid high temperature conduction and control the internal temperature of the tank. | ||||
