Audited Supplier
aike
Counter Flow
Natural Ventilation
FRP
Wet
Open
Round
Low
Industrial
ISO, CCC
New
Aike-Cdbnl
4kw
Fire Ratardant PVC
PVC Slope Piece
aike
The Wooden Case
50 cubic
China
841950000
Product Description
FRP Counter Flow Square Water Cooling Tower for industrial cooling
Product Description:
Our Certificate:
Installation Step:
Instructions for selection and use:
1.Water quantity Q, inlet temperature t1 and design wet-bulb temperature t were selected, and the model was determined according to the thermodynamic energy curve. If the curve exceeds, the requirements can be submitted to the design institute, and the design institute will determine the tower type.
2.As far as the cold resistance of the material is concerned, it can be applied in the region with minus 50 c, but for the region with the coldest month below minus 10 c on average, anti-icing measures should be put forward when ordering, and water diversion ring can be equipped before delivery to prevent water from flowing to the shutters.
3.Turbidity of circulating water shall be no more than 50mg/ l and no more than 100mg/ l in the short term. It shall not contain oil and mechanical impurities. If necessary, algal killing and water quality stabilization measures shall be taken.
4.Foundation drawing for installation reference, can be reserved bolt hole, can also be embedded foot plate. The direction of inlet and outlet water pipes of the big tower is shown in the drawing. The small tower can be set at any horizontal position .
Packing &Delivery:
FAQ:
Product Description:
| Model | CDBNL3-60 | CDBNL3-70 | CDBNL3-80 | CDBNL3-100 | CDBNL3-125 | |
| t=28C Cooling Water Flow (m3/h) | t=5C | 60 | 70 | 80 | 100 | 125 |
| t=8C | 44 | 51 | 61 | 74 | 92 | |
| t=27C Cooling Water Flow (m3/h) | t=5C | 68 | 79 | 92 | 114 | 142 |
| t=8C | 51 | 60 | 70 | 86 | 108 | |
| Main Size (mm) | Total Height | 4066 | 4153 | 4403 | 4440 | 4690 |
| Max Dia. | 2800 | 3300 | 3300 | 3900 | 3900 | |
| Fan Dia.(mm) | 14000 | 1600 | 1600 | 1800 | 1800 | |
| Motor Power (Kw) | 1.5 | 2.2 | 2.2 | 3 | 4 | |
Our Certificate:
Installation Step:
Instructions for selection and use:
1.Water quantity Q, inlet temperature t1 and design wet-bulb temperature t were selected, and the model was determined according to the thermodynamic energy curve. If the curve exceeds, the requirements can be submitted to the design institute, and the design institute will determine the tower type.
2.As far as the cold resistance of the material is concerned, it can be applied in the region with minus 50 c, but for the region with the coldest month below minus 10 c on average, anti-icing measures should be put forward when ordering, and water diversion ring can be equipped before delivery to prevent water from flowing to the shutters.
3.Turbidity of circulating water shall be no more than 50mg/ l and no more than 100mg/ l in the short term. It shall not contain oil and mechanical impurities. If necessary, algal killing and water quality stabilization measures shall be taken.
4.Foundation drawing for installation reference, can be reserved bolt hole, can also be embedded foot plate. The direction of inlet and outlet water pipes of the big tower is shown in the drawing. The small tower can be set at any horizontal position .
Packing &Delivery:
FAQ:
· How about the quality of your product?
· Our products manufactured strictly according to national and international standard.
· We have CE, ISO certification.
· We take a test on every product before delivery.
· How about the price of this product?
· We can give the lowest price than market one.
· We do quotation as soon as possible for any customer.
· Discount can be given according to quantity.
· What is the MOQ?
· 1 set.
· If you can be customized?
· We can make products according to customer's requirements.
· What is the voltage?
· 380V 50hz 3 phase or any other voltage according to client's requirement.
