Audited Supplier
FT80t
Xinjie
Sea Package
6000*4000*1000mm
Origin in China
8428909090
Product Description
FT80 Core Overturning Table
Short Description:
FT80T core overturning table equipment and standard accessories are used for overlaying and overturning of three-column and five-column cores of 80T transformers.Product details:
Technical Parameters of core stacking and tilting table(1) Specification model: FT80T
(2) Maximum load bearing (T) : 80 (excluding iron yoke) for manufacturing: three-column core
(3) The maximum size of the core (excluding the size of the clip) can be manufactured:
(4) L * H (feng yoke upside down at the bottom of the iron yoke) x Φ column diameter (mm) :
6000 * 4000 * 1000 Φ
(5) Minimum distance (mm) from the center of the pillar: 600
Main components of the overturning table equipment:
1. The turnover table is mainly composed of the following parts
(1) Longitudinal beam for the overturning table equipment (also known as i-shaped platform, stacked iron platform) : hot-rolled section steel or low carbon steel welded structure, in order to ensure the flatness, the key position is machined.The aging treatment should be carried out for the welded structure.The longitudinal beam is equipped with an overturning leg, which can prevent the core from unsteadily overturning after 90° overturning.The lower part of the longitudinal beam has positioning slot block, which can move laterally and laterally with the positioning slot in the foundation, so it can adapt to different window size Mo.
(2).Toothed reversal beam for core overturning table : it is machined with low carbon steel after welding, and is of gradual opening tooth shape with stable rollover.Independent plug type structure, can not be placed on the rail when stacking iron, reduce the occupation of work space.Flip only through the first shaft and longitudinal beam into one, easy to operate.
(3).Rolling base for transformer core stacking table: low carbon steel welded structure, with tooth beam to ensure stable rolling of the iron core.
