Audited Supplier
Plastic Particle
Photodegradable
25038-59-9
C10h804
25038-59-9
Polyethylene Terephthalate/PET
General Plastics
Thermoplastic Plastics
Film Pressure
White
Avaiable
Injection,Extrude,Film,Raffia Grade
99.9
2 Years
Carton
25Kgs/Bag
China
3902100090
Product Description
Product Description
Product name: Plastic Particle PET
PET Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance
and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic.
The electrical insulation of PET is perfect and little
be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents.It is a condensate of terephthalic acid and ethylene glycol, together with PBT, referred to as thermoplastic polyester, or saturated polyester. PET Characteristic: is milky white or light yellow highly crystalline polymer, the surface smooth and shiny.
Application
1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.
Product name: Plastic Particle PET
| Feature: | Biodegradable |
|---|---|
| CAS No.: | 25038-59-9 |
| Formula: | C10h804 |
| EINECS: | 25038-59-9 |
| Material: | Polyethylene Terephthalate/PET |
| Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic.
The electrical insulation of PET is perfect and little
be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents.It is a condensate of terephthalic acid and ethylene glycol, together with PBT, referred to as thermoplastic polyester, or saturated polyester. PET Characteristic: is milky white or light yellow highly crystalline polymer, the surface smooth and shiny.
Application
1. PET is mainly used for fibers, and a small amount is used for films and engineering plastics.
2. Another use of PET is blow molding products, which are used in various bottles, such as water bottles, carbonated beverage bottles, and oil bottles.
