Audited Supplier
PE Water-supply Pipes
Single-screw
Automatic
Computerized
ISO9001:2008
Customized
New
400kg/Hr
middle tech
Wood
sgs
Zhangjiagang City
84772090
Product Description
HDPE/PPR/LDPE
plastic Pipe extrusion and production line
PART 1 INTRODUCTION:
Through technology combination and continuous innovation, Midtech pleased to provide energy saving (15% down), high capacity (exceed 25% ), high standard (PLC Intelligence), reliable quality (SKF bearing) PE/LDPE/PPR Extruder and pipe extrusion and production line.
PART 2 Working flown of the pipe production line
PART 3 Why choose us
If you do need any support, please don't hesitate to contact us.
plastic Pipe extrusion and production line
PART 1 INTRODUCTION:
Through technology combination and continuous innovation, Midtech pleased to provide energy saving (15% down), high capacity (exceed 25% ), high standard (PLC Intelligence), reliable quality (SKF bearing) PE/LDPE/PPR Extruder and pipe extrusion and production line.
| Pipe Diameter | 16-63 | 32-125 | 75-250 | 110-450 | 315-630 | 315-800 |
| Extruder | 45/33 | 65/33 | 75/33 | 90/33 | 120/33 | 150/33 |
| Cavity | single strand | single strand | single strand | single strand | single strand | single strand |
| Downstream | LG63 | LG125 | LG250 | LG450 | LG630 | LG800 |
| Total power(kw) | 70 | 150 | 230 | 380 | 550 | 800 |
PART 2 Working flown of the pipe production line
| Feeder | • To feed material into extruder; |
| Extruder | • High torque gearbox with adopts NSK/SKF bearing; • Siemens/WEG original motor achieved global after service; • Up to 30m/min of maximum lineal extrusion speed for small pipes • Suitable for multi-layers co extrusion from 1-5 layers; • Intelligent PLC controlling system with operation-friendly interface. |
| Die head | • PCA increased extrusion speed and decrease the cooling length, quality inner wall surface; • The Bronze bush is wear-resisting and efficiency cooling of pipe surface. |
| Calibration Tank Spray tank | • Big water flown filtration system • Mechanical Water level and temperature control system |
| Haul off | • Variant 2-16 claws based on different pipe diameters, • Equipped with servo control system for wide diameter range. |
| Cutter | • Chip-free cutter ensuing flat and smooth cutting surface of pipe. |
| Stacker | • Discharge driving by air cylinder |
| Winder | • Suitable for diameter from 5mm-110mm |
PART 3 Why choose us
If you do need any support, please don't hesitate to contact us.
