Factory Price Outdoor Self-Supporting ADSS Aerial Optical Cable Span Fibra Optica Cable

Single Layer All-Dielectric Self-Supporting ADSS Cable, is designed for outside plant aerial and duct applications in local and campus network loop architectures.The cable  includes fiber counts up to 144 optical fibers and any type of combination of single-mode and laser-optimized multimode fibers with the cable.Pole-to-Pole span lengths range from 50 metres to 300 metres.

Double Layer Aerial ADSS Cable: The fibers are positioned in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A fibre reinforce plastic locates in the center of core as a non-metallic strength member. The tube(and the fillers) are stranded around the strength member into a compact and circular core. The cable core is covered with a PE inner sheath. After the aramid yarns covered over the inner sheath, the cable is completed with a PE or AT outer sheath.

Applications:
1. Railway, power, and telecommunications pole routes
2. Can be used in areas subject to frequent lightning strikes
3. Very suitable for transmission lines with high electric field strength
4. Suitable for installation on poles and distribution networks
5. Short span, medium span, and long span self-supporting applications in the air.
6. When designing ADSS cables, full consideration was given to the actual situation of overhead power lines.
7. PE outer sheath is used for overhead power lines below 110kV.
8. 110kV and above power lines adopt AT outer sheath.