Audited Supplier
001
Silicone Rubber
Machinery, Industrial Component, Electronic Product, Vehicle, Household Appliance
Fixture&Sealing
Rectangle Ring
Soft, Middle Soft, Hard
Mc237-Non- Latex Makeup Sponge
Yes
Optional / Customized
Oval or Customized Shape
Makeup, Foundation, Clean..
No Latex Non-Toxic, Soft Delicate
Durable
High Density
Quick Drying
Good Elasticity
jcchemi
Export Carton
Custom any size
China
3926909090
Product Description
Product Description
Orange natural rubber foam is made of natural rubber sponge. The normal color is orange, so it also called natural foam sponge. It is widely used for Trowels on construction and painting tools on gallery. It can be used for cleaning the dirty or powder on the hard surface. The density of natural rubber foam pad is very low, about 0.3g/cm3. It is an good Wear-resisting sponge material and have long service life.
After pumping the concrete mortar,pump car should immediately clean the concrete in the pipeline hopper,mainly divided into two types of washing:water washing and gas washing.Whether it is washing or gas washing,must clean the valve box and hopper.
When water washing,plunge into a cylindrical cement bag with the cleaning ball,Installed in a clean cone tube successively,connecting tube, pipe, close the discharge gate, and then to the hopper is filled with water (water must be kept constant).Pumping water until the cleaning ball comes out of the front end of the conveying pipe.
Gas washing, compressed air blowing,is to soak the water to clean the ball,foist into the gas washing joints,then connect the first straight pipes connected with the reducing tube,and at the end of the pipe to connect the safety cover,the orifice safety cover to face down.Control the pressure of compressed air is not more than 0.8MPa, the valve should be slow to open, atmos-valve can be opened when the concrete can flow out smoothly.Gas washing is completed, the valve should be closed immediately.
| Item name | orange natural rubber foam |
| Density | about 300KG/M3 |
| Porosity | fine, medium and large pore |
| Thickness | up to 100mm |
| Normal size | 520mm x 470mmx100mm, 520mm x 470mm x 60mm, 520mm x 470mm x 20mm, 280mm x140mm 10mm, 280mm x140mm 20mm, 280mm x140mm 30mm, |
After pumping the concrete mortar,pump car should immediately clean the concrete in the pipeline hopper,mainly divided into two types of washing:water washing and gas washing.Whether it is washing or gas washing,must clean the valve box and hopper.
When water washing,plunge into a cylindrical cement bag with the cleaning ball,Installed in a clean cone tube successively,connecting tube, pipe, close the discharge gate, and then to the hopper is filled with water (water must be kept constant).Pumping water until the cleaning ball comes out of the front end of the conveying pipe.
Gas washing, compressed air blowing,is to soak the water to clean the ball,foist into the gas washing joints,then connect the first straight pipes connected with the reducing tube,and at the end of the pipe to connect the safety cover,the orifice safety cover to face down.Control the pressure of compressed air is not more than 0.8MPa, the valve should be slow to open, atmos-valve can be opened when the concrete can flow out smoothly.Gas washing is completed, the valve should be closed immediately.
